Candy cane build done, ran 35 days on one charge

Nov 19, 2026 Last reply: 5 hours ago 3 Replies
Jump to replies (3)

Finished a little candy cane decoration for the holidays and I'm still kind of amazed by the battery life. It's just a 555 timer driving some red and clear LEDs arranged in the cane shape, and it ran for 35 days straight off a single 18650 before I finally turned it off. Didn't plan on that kind of runtime, it just kept going so I let it. Built it on perfboard, nothing fancy. There's a second 16-pin chip on there alongside the 555, plus a couple potentiometers to tweak the pattern speed, and the usual resistors and capacitors scattered around. The red and clear LEDs alternate along the hook of the cane so the stripe effect reads relly well from across the room. It's a simple build but it's mine, and honestly watching it blink away for over a month without a recharge was the best part. alredy thinking about what to do with it next season.


I've got a soft spot for builds like this. Most of my holiday stuff runs addressable strips with WLED doing the driving, and even with the brightness dialed down those setups still want a proper supply. A plain 555 blinking a handful of LEDs is on another level of thrifty, and there's something satisfying about a circuit so simple it barely notices the battery is there.

Curious what the second chip on your board is handling. Is it doing the pattern sequencing while the 555 sets the pace, or something else entirely? The way you describe the red and clear alternating along the hook so the stripes read from across the room makes me want to try a similar layout next season, maybe bent into a wreath shape instead.

One thing I'd ask is how you're planning to store and top up that battery between seasons, since letting one sit fully drained for months isn't kind to it. Either way, just letting it blink until you felt like switching it off is exactly the right way to enjoy a build like this.

Funny how we all land on different ways to blink some LEDs. I got in the habit years ago of skipping timer chips entirely and just building the flasher out of a couple of transistors and whatever caps were in the drawer. Works fine, but I'll admit it never gives you the easy speed control that a pot wired to a 555 does, so the way you set yours up to tweak the pattern speed is something mine can't do.

What I keep coming back to is the runtime. I've always assumed anything battery powered over the holidays would be lucky to make it through a couple of weeks, so hearing yours coast along for 35 days before you even switched it off makes me want to go back and look at how I'm driving mine. Low duty cycle and a small handful of LEDs really does add up. Also curious about the layout on yours. With the chips, pots and the alternating red and clear LEDs all on one perfboard, did you lay it out to match the cane shape first and fit the circuit around it, or build the circuit and bend the LED legs to form the hook after? I've only ever tried the second way and it always ends up a bit lopsided.

There's something about a 555 blinking away that never gets old, no matter how fancy the addressable stuff gets. I built a star topper one year with a 555 and a pot for the twinkle rate, and I remember spending a whole evening just nudging that pot back and forth until the pace felt right. Yours with the red and clear alternating down the hook sounds like it reads even better, since you get that stripe movement from a distance instead of just a fade. Out of curiosity, did you mount the board somewhere hidden or leave it visible as part of the decoration? Half the charm of a perfboard build is that you can see it working.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required