SONY DCR-TRV520 Fault Solved!

I finally determined the LCD display fault was being caused by movement of the LCD panel, but I could not get any sort of correlation between the movement of the panel and the display fault. I decided that somehow, pressure was being applied inside the LCD panel to the membrane switch for volume. I removed the 4 screws and took off the LCD panel outer cover. I blew out the circuits and rearranged the ribbon cables slightly. I really couldn't see any fault, but after reassembly, the display fault has disappeared, and the camera functions normally. YAAAAAAYYYYYY! JR

        Home Page:
Reply to
JR North
Loading thread data ...

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.