I'm hoping somebody here HAS this scale, and more importantly has the tools and skill set to probe it's cable for me.
The scale has a 9-pin DB9M. So a PC cable would be female-female.
It isn't straight through, nor did a null-model help.
It is non-standard!
Well they provide the wire, but I got mine without.
It is completely useless if I can't upload the new rates into the scale.
Anybody?
Help!
Thankx, in advance.
Jack :)
On Tue, 20 Sep 2005 21:25:54 -0700, Jack Edin put finger to keyboard and composed:
Does the scale's interface look like RS232, or is it TTL? That is, do the scale's pins produce voltage swings of +/-12V or 0-5V, or something else? If RS232, which are the output pins, ie which pins are held at logic high or logic low? Input pins will probably float at close to 0V. Is pin 5 the scale's ground pin? Is any pin connected to the scale's metalwork?
-- Franc Zabkar
Please remove one 'i' from my address when replying by email.
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.