13 discussions on ElectronDepot about the Philips LPC2138: what owners asked, what went wrong, and what fixed it.
I found my J-Link lying around and tried again to get IAR to play nicewith an NXP ARM7, and I'm heading to the conclusion that thistoolchain simply doesn't work with NXP. Here's what happens - it'sreally weird, so maybe someone can...
We are developing a TCP/IP enabled embedded product and are looking fora 10/100 non-PCI Ethernet Controller for as close to $3 (budgetarypricing) as possible. We've found SMSC and Asix products as low as $8.Is there anything out there that...
Hi everyone,Ive only worked with the Atmel ARM variants, but im curious aboutknowing your views on which ARM-based microcontroller is the mostpopular..Plz enlighten me!RegardsMayank
I'm building a small device that will talk to the world through a modem.I've ordered the XE2422H devkit from XEComm. It basically has a RJ-11connector for the phone line and an RS232 connector for the controller.I need a cheap...
hii m working on ARM micro LPC2138 but m unable to initialise or to makework itsfast GPIO.i hav configured the settings for fast GPIO in SCS registerbut still its not working.i m trying this with simple example to toggle LEDs connected to...
Hi all,I' m looking for a co processor which have two ADC inputs ,an output to generate an interruption and an indifferent serial bus to communicate.I would like to do this operation in 100ns :(Acquisition of the ADCs, ArcTang operation and...