10 discussions on ElectronDepot about the Digilent JTAG3: what owners asked, what went wrong, and what fixed it.
I'm trying to renew my experience on fpga so last week I buy aSpartan 3AN DSP development boardAES-SPEEDWAY-S3ADSP-SK from Silica for about 235euro.But I've not the cable to program it, so I ask to Silica that suggestme the 140 euros but my...
Out of interest, would anyone happen to know what is the difference inperformance between a Virtex fpga (not vitex 2) and its equivalentSpartan3???Thanks C
I just got a Digilent Spartan3E board & tried to load a bit file using webpack 9.2IMPACT says no USB cable found. Then I tried one of the JTAG3cables from Digilent. IMPACT can see the cable but detects too manyunknown devices. I'm guessing...
Hi,To program my Atmel(ATmega128L) controller and Xilinx FPGA (sparta-3XCS400) at the same time, I decided as a programmer to use the XilinxParallel Cable III. I implemented the programmer 100% the same asfound in Xilinx's website (...
Hiya folks. I've come up with a few designs for modifying variousdevices on different occasions, but in almost every case, it requiresa lot of logic components to process the signals and then output onesbased on how I've modified them...
finally the free Sample Pack info is available from Xilinx directlythere is no note that there is no availability in Europe so it still makessense to contact the distributors also in Europe, maybe there is availabily.After one more attempt...