15 discussions on ElectronDepot about the Dallas DS18S20: what owners asked, what went wrong, and what fixed it.
So we're looking to sense temps in the ~~0-40C range, and wondered what to use. In the past I've used LM35's and would again, but all the cool kids seem to using this digital stuph, so I was wondering what's a roughly parallel sensor that...
Liebe Gemeinde,ich versuche gerade einen PT1000 Temperaturfühler mit dem ADC eines ATmega16 zu verheiraten. Das Funktioniert insoweit, dass sich die Spannung ändert wenn ich das Feuerzeug an den Sensor halte (so 10 digits). Der Sensor ist...
Salve a tutti!premetto che non sono frequentatore di questo newsgroup ma penso chepossiate aiutarmi a risolvere o a chiarirmi un problema.Sono un aeromodellista e sto costruendo un modello abbastanza grande chesarà motorizzato con un...
Czy może ktoś polecić jakiś gotowy układ do pomiaru temperatury z możliwością odczytu danych przez USB?
Dont ask why (I suspect i am over complicating matters somewhat) but I amthinking about attempting to control the central heating via pc.To do this I need to take two tempreature readings (flow and return) andfeed this information to the PC...
Hi All, I am considering using a Dallas DS18S20 temp sensor for a remote ( outside air temp ) sensor. Sensor will be at most a few feet from the processor doing the measurement but on a 2 wire ( ground and signal ) cable plugged into...