Using XBERT(XAPP661) with EDK6.3SP1

I found 2 version of this reference design on Xilinx website.

ftp://ftp.xilinx.com/pub/applications/xapp/xapp661.zip (Use for EDK3.2)

formatting link
(Use for EDK6.1)

Anyone know is the version for EDK6.3 is available? I choose the one for EDK6.1 and try to open the "system.xmp" file by EDK6.3, the error was found as below.. Can anyone suggest how to fix it?

Congratulations!! Your project has been successfully updated to EDK 6.3 PM_SPEC -- Xilinx path component is WARNING:MDT - K:\DG_IP\xapp661_2\pcores\clk_startup_v1_00_a\data\clk_startup_v2_1_0.mpd:3 Options can not be specified in the same line as "BEGIN "

WARNING:MDT - K:\DG_IP\xapp661_2\pcores\plb_icap_top_v1_00_a\data\plb_icap_top_v2_1_0.mpd:3 Options can not be specified in the same line as "BEGIN "

WARNING:MDT - K:\DG_IP\xapp661_2\pcores\plb_mgtbert_v1_00_a\data\plb_mgtbert_v2_1_0.mpd:3 Options can not be specified in the same line as "BEGIN "

ERROR:MDT - Can not find valid MPD for Ip ppc405 1.00.a INFO:MDT - Check the following for possible causes of not finding MPD: - If HW_VER is specified in MHS, it must follow literal form X.YY.Z - There is no Ip with given name - Ip exists but not that version - Ip (directory) exists but 2.1.0 MPD file is not available - Ip exist in myip directory (only pcores is supported)

ERROR:MDT - Can not find valid MPD for Ip jtagppc_cntlr 1.00.a INFO:MDT - Check the following for possible causes of not finding MPD: - If HW_VER is specified in MHS, it must follow literal form X.YY.Z - There is no Ip with given name - Ip exists but not that version - Ip (directory) exists but 2.1.0 MPD file is not available - Ip exist in myip directory (only pcores is supported)

Reply to
Thanaporn
Loading thread data ...

K:\DG_IP\xapp661_2\pcores\clk_startup_v1_00_a\data\clk_startup_v2_1_0.mpd:3 Options

K:\DG_IP\xapp661_2\pcores\plb_icap_top_v1_00_a\data\plb_icap_top_v2_1_0.mpd:3 Options

K:\DG_IP\xapp661_2\pcores\plb_mgtbert_v1_00_a\data\plb_mgtbert_v2_1_0.mpd:3 Options

--
/ 7\'7 Paulo Dutra (paulo.dutra@xilinx.com)
\ \ `  Xilinx                              hotline@xilinx.com
 Click to see the full signature
Reply to
Paulo Dutra

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.