Embedded Programming

CANopen performance

We are having problems with failures when attempting relatively rapid CANopen write requests. The initial estimate for...

2 comments posted 22yrs

posted by philip_b_taylor

2 comments posted 22yrs posted by philip_b_taylor

NicheTask is NOT FreeRTOS

The domain FreeRTOS.com was registered very shortly after I first announced FreeRTOS.org - a totally unrelated site. In...

6 comments posted 22yrs

posted by noemail

6 comments posted 22yrs posted by noemail

at91 choices for my application...help

I am trying to decide what flavor of the AT91 series ARM ucontrollers to use for a low cost, low volume product. I need...

10 comments posted 22yrs

posted by rick

10 comments posted 22yrs posted by rick

What are the typical applications for Atmel's CPUs?

Hi, there: I want to know what are the typical applications of an Atmega169 CPU...Is it popular? Thanks for your advice....

3 comments posted 22yrs

posted by kelvin8157

3 comments posted 22yrs posted by kelvin8157

RTOS interrupt latency and motor control

Hi, I have to interface a WiFi card (most likely PCMCIA, probably USB too) onto a board that also has a motor controlle...

9 comments posted 22yrs

posted by valemike

9 comments posted 22yrs posted by valemike

small colour LCDs

Can anybody recommend some small colour LCDs that can be easily interfaced with a microcontroller? If people could tell...

12 comments posted 22yrs

posted by gned

12 comments posted 22yrs posted by gned

Spirit rover OS problems

I'm kinda surprised not to have seen discussion here of the Flash memory/OS problems suffered by the Spirit rover. It s...

180 comments posted 22yrs

posted by steve

180 comments posted 22yrs posted by steve

ANN: NicheTask Open Source Operating System

This is a one-time announcement of the launch of http://www.FreeRTOS.com Recognizing that many designs require only a c...

5 comments posted 22yrs

posted by Marketing

5 comments posted 22yrs posted by Marketing

Replacing RS-232 with PCMCIA

I have an existing product, using an 8 MHz 12 cycle 8032, interfaced to a ruggedized handheld PC via 232 at 9600. We wo...

3 comments posted 22yrs

posted by thadsmith

3 comments posted 22yrs posted by thadsmith

Single board computers

Hello, I'm looking to replace a laptop with a single board computer for data acquisition and control, via ethernet. I w...

9 comments posted 22yrs

posted by mvk2

9 comments posted 22yrs posted by mvk2

IAR VisualSTATE

Has anyone any experience in using the IAR VisualSTATE for developing, verifing and testing of control software for 8 bi...

2 comments posted 22yrs

posted by frank36*2

2 comments posted 22yrs posted by frank36*2

NAT9914 and microcontroller

Hi for a new project we use a microcontroller and a NI NAT 9914 ASIC. Can anyone help me for inizializing and use (inter...

0 comments posted 22yrs

posted by NO_m.weidmann

0 comments posted 22yrs posted by NO_m.weidmann

Could somebody read out a GAL20V8 for me? (or measure it)

Need to read out the content of a GAL20V8. It does not use any FF's. It contains pure combination logic. I know a bunch...

4 comments posted 22yrs

posted by vax3900

4 comments posted 22yrs posted by vax3900

ISP1301 driver query

Hello, In Omap730 board we are using external transceiver which is connected to Omap processor thru’ I2C. I am us...

0 comments posted 22yrs

posted by dathathreya.bhat

0 comments posted 22yrs posted by dathathreya.bhat

Thin client case for microatx motherboard

Hi, I am looking for a very small case to use with a microatx motherboard. This is for a thin client application. Can an...

1 comments posted 22yrs

posted by v_kanchan

1 comments posted 22yrs posted by v_kanchan