Embedded Programming

16390 Threads Posts
to

"Status of fuzzy logic"

A while back comp.ai.fuzzy had a "status of fuzzy logic" discussion. In response I did a little informal investigation....
0 comments posted 19yrs
posted by kirk
0 comments posted 19yrs posted by kirk

FPGA Development Board

Dear Group, I=B4m new to FPGA, i.e. I=B4m about to start... Can anyone suggest a good development board for starters, o...
16 comments posted 19yrs
posted by elbor_x
16 comments posted 19yrs posted by elbor_x

Choosing a board for personal use

Hi, I`ve just finished a small project using a Freescale EVB9S12NE64 board, and I can say i`m pretty impressed by the p...
3 comments posted 19yrs
posted by ryufrank
3 comments posted 19yrs posted by ryufrank

Serial port multiplexing? How to?

Hi. I have only one available UART on a micro but need to connect two serial devices (chips on the same board). Is ther...
12 comments posted 19yrs
posted by aribloch
12 comments posted 19yrs posted by aribloch

building an AVR programmer CABLE

I'm trying to build a parallel port AVR programmer cable. Surprisingly, this is turning out to be the most complex part...
28 comments posted 19yrs
posted by mrdarrett
28 comments posted 19yrs posted by mrdarrett

Anyone using project collaboration tool?

First, I know this is an embedded group. We do that. We probably have similar needs. Is anyone using a collaboration to...
25 comments posted 19yrs
posted by scott
25 comments posted 19yrs posted by scott

priority of CAN messages

Hi there - I was just reading about priority of CAN messages - and want to confirm a couple things: First of all, my un...
2 comments posted 19yrs
posted by nleahcim
2 comments posted 19yrs posted by nleahcim

compact flash/pcmcia without crc check

Hello, One piece of equipment (Lecroy scope) takes a compact flash card via a PCMCIA adapter, but the combo must not im...
1 comments posted 19yrs
posted by dfnum2
1 comments posted 19yrs posted by dfnum2

Application for sending Raw ethernet packet

Hi, I am in need of some application to send/receive raw ethernet packets fro PC. Please provide me with some pointers f...
4 comments posted 19yrs
posted by nagendran.v
4 comments posted 19yrs posted by nagendran.v

Debugging RTOS problems in embedded systems

Dear All, Most of us involved with RTOS projects in embedded systems need to encounter at one point or other problems p...
40 comments posted 19yrs
posted by ssubba
40 comments posted 19yrs posted by ssubba

Doppler vehicle ground speed detection?

Has anyone worked with this technology for automotive applications? This is in connection to using this technology to m...
33 comments posted 19yrs
posted by aribloch
33 comments posted 19yrs posted by aribloch

LCD problem

Hello. I am developing with samsung 2410 and currently attaching LCD. Some progress was made and I have a problem. LCD...
1 comments posted 19yrs
posted by jkim747.n0zpam
1 comments posted 19yrs posted by jkim747.n0zpam

MIPS vs ARM architectures

Hi all, I've been curious about the relative merits of ARM and MIPS and just stumbled across a thread from March in whi...
7 comments posted 19yrs
posted by dlenski
7 comments posted 19yrs posted by dlenski

CAN Controller Receive Error

Hi, Can anyone tell me in what scenarios CAN node detects the recieve error and increments REC ?? I know about the kind...
1 comments posted 19yrs
posted by akhil.misra
1 comments posted 19yrs posted by akhil.misra