Embedded Programming

  1. Home
  2. Embedded Programming
16390 Threads Posts
to

Worth reading in Embedded Programming

Anyone used Portmon on a USB-RS232?

Ok, folks, Portmon shows COM6 which is the port to a scope, via a USB connection. The terminal program (TeraTerm) is ta...
53 comments posted 19yrs
posted by notthisjoergsch
53 comments posted 19yrs posted by notthisjoergsch

Emulating 1-wire interface with a microcontroller

Hi, I have a microcontroller with GPIO, I2C and UART, and I'm trying to emulate a 1-wire interface so that the microcon...
9 comments posted 19yrs
posted by goister
9 comments posted 19yrs posted by goister

instruction set of ste2004s

Hi Everyone I have 96X40 lcd of barton and STE2004S as adriver. I cant resolve how to write the command words. Or maybe...
0 comments posted 19yrs
posted by alonrada
0 comments posted 19yrs posted by alonrada

USB audio chip

Hi i am looking for some type number of chips to use as an USB audio device it must have line in / line out , non BGA (s...
2 comments posted 19yrs
posted by sagaert.johan
2 comments posted 19yrs posted by sagaert.johan

Shall I move from C to Java?

Hi everyone, I am planning to learn Java. Can I access HW registers in Java? Or can I call C function from Java program?...
34 comments posted 19yrs
posted by dick_12345678
34 comments posted 19yrs posted by dick_12345678

FAT16/32

Hello All, Can you suggest a _good_ realization of the embedded FAT16 _and_ FAT32 filesystem driver in C ? The preferen...
15 comments posted 19yrs
posted by antispam_bogus
15 comments posted 19yrs posted by antispam_bogus

FAT

Hello All, Can you suggest a _good_ realization of the embedded FAT16 _and_ FAT32 filesystem driver in C or C++? It is...
2 comments posted 19yrs
posted by antispam_bogus
2 comments posted 19yrs posted by antispam_bogus

Stepper Drivers

I've got a client in a bind. He's designed in these parts: http://www.interinar.com/stepper%20driver%20BSD-02.htm, but...
10 comments posted 19yrs
posted by tim
10 comments posted 19yrs posted by tim

tall mini pci connectors?

Hey there - I'm hoping to find a right angle mini-PCI connector that would leave the connected mini-pci card about 1.5cm...
2 comments posted 19yrs
posted by nleahcim
2 comments posted 19yrs posted by nleahcim

Modbus TCP & SEMI E54

Anyone got any experience with implementing SEMI E54 over Modbus TCP using Object Messaging? I'm currently wading throug...
1 comments posted 19yrs
posted by tedwood
1 comments posted 19yrs posted by tedwood

National Semi DP83848C Ethernet issue.

Hello folks. I have designed a DM641 DSP-based board with a National Semiconducto DP83848C Ethernet PHY chip, and am fa...
0 comments posted 19yrs
posted by vishnu.swaminathan
0 comments posted 19yrs posted by vishnu.swaminathan

edk+uclinux ??? <about make dep>

what's wrong with following word??? [root@localhost uClinux-dist]# make dep make ARCH=microblaze CROSS_COMPILE=mb- -C l...
0 comments posted 19yrs
posted by kobelai15
0 comments posted 19yrs posted by kobelai15