Embedded Programming

  1. Home
  2. Embedded Programming
16390 Threads Posts
to

Worth reading in Embedded Programming

LPC3180 ARM uC power supply

LPC3180 is a ARM926EJS core which uses a 1.2V for the core, sdram, etc and 1.8V/3.0V for IO. What power supply/regulato...
11 comments posted 18yrs
posted by kalyanamsaritha
11 comments posted 18yrs posted by kalyanamsaritha

USB on LPC2468

hi, I want to use host controller on lpc2468 ARM controller. but i very much confused how to write firmware for it. plz...
0 comments posted 18yrs
posted by siover2001
0 comments posted 18yrs posted by siover2001

ZNEO Z16F and TCP/IP

Hi, Does anyone know of a small TCP/IP-stack for the ZNEO Z16F microcontroller? Neither the ZTP nor the CMX-MicroNet su...
0 comments posted 18yrs
posted by erlenda
0 comments posted 18yrs posted by erlenda

USB slave to host

AIn general, is it possible to emulate a USB host interface using a US slave interface (bit-banging etc)? Can this be ac...
6 comments posted 18yrs
posted by kalyanamsaritha
6 comments posted 18yrs posted by kalyanamsaritha

SMSC Register read write

Hi all , I am able to write to SMSC 91C111 MAC/PHy controller with out problem configure it and transmit data , but whe...
0 comments posted 18yrs
posted by niladri1979
0 comments posted 18yrs posted by niladri1979

how to port the RTOS

Hi to all, I'm a newbie to this group and RTOS , I want to know what the Portin means and how to implement my rtos with...
2 comments posted 18yrs
posted by sathishshyamala
2 comments posted 18yrs posted by sathishshyamala

STR912 + PSRAM performance benchmark

Anyone has experience (really measured) the performance difference betwee running from internal Flash of the STR912 in...
7 comments posted 18yrs
posted by marc.rousseau
7 comments posted 18yrs posted by marc.rousseau

byte swapping?

http://www.freepatentsonline.com/7047383.html martin
4 comments posted 18yrs
posted by mart_in_medina
4 comments posted 18yrs posted by mart_in_medina

Time and time again (UTC leap seconds)

I just did a tiny NTP time read utility. NTP comes in UTC, which is in seconds since 1900 - OK, I did that. There are a...
8 comments posted 18yrs
posted by dp
8 comments posted 18yrs posted by dp

Chuck Moore's 25x Multicomputer Chip -Guy Macon

On Chuck Moore's website [ http://www.colorforth.com/ ], there is a link [ http://www.colorforth.com/25x.html ] labeled...
11 comments posted 18yrs
posted by http://www.guymacon.com/
11 comments posted 18yrs posted by http://www.guymacon.com/

need some help programming a pic

I have some hardware that has a PIC18F6680 pic cpu. This is older hardware that is non programmable that we are startin...
1 comments posted 18yrs
posted by dave_k_420
1 comments posted 18yrs posted by dave_k_420