Embedded Programming

Re: Complex digital ICs visual simulation?

>> If I e.g. place a RAM component into MultiSim, will it simulate >> it? I.e. can I (using switches and hex displays)...

0 comments posted 23yrs

posted by NOSPAM

0 comments posted 23yrs posted by NOSPAM

MCF5282

I'm looking for a Motorola MCF5282 symbol for eagle (cadsoft). Google didn't turn up anything. Any info would be greatly...

0 comments posted 23yrs

posted by ianmcbride2003

0 comments posted 23yrs posted by ianmcbride2003

Lithium button cell, avoid passivation

In an embedded system we have a lithium button cell to provide power for the real time clock IC and some RAM when exter...

3 comments posted 23yrs

posted by mdc

3 comments posted 23yrs posted by mdc

Microcontroller speed comparison

I know a direct comparison is hard to achieve, but does anybody know of a site that gives at least an idea of how the sp...

7 comments posted 23yrs

posted by ken_barlow

7 comments posted 23yrs posted by ken_barlow

Circuit Cellar Ink back issues for sale 1991-1995

Hello. I saw other CCInk back issues for sale on eBay. So I listed my 1991-1993 issues: http://cgi.ebay.com/ws/eBayISAP...

0 comments posted 23yrs

posted by de.g.u

0 comments posted 23yrs posted by de.g.u

intel xscale reference board... where in intel website?

hi. can someone point me out where in intel website i can find complete reference design for xscale? the schematics, pcb...

3 comments posted 23yrs

posted by dreamguy007

3 comments posted 23yrs posted by dreamguy007

Different types of ASICs?

Hello there! Talking about ASICs, what's (in detail if possible :P ) the difference between "gate arrays" versus "full c...

0 comments posted 23yrs

posted by NOSPAM

0 comments posted 23yrs posted by NOSPAM

ARP frame vs MAC frame

I am looking to see if anyone out there can give me some information on: - what is ARP frame - what is MAC frame - or b...

3 comments posted 23yrs

posted by sara

3 comments posted 23yrs posted by sara

Setting tftp server in RH8

Hi all, I previously using the Red Hat 6.2 and using it to setup a DHCP/TFTP server to do network boot to other compute...

1 comments posted 23yrs

posted by jpymsol

1 comments posted 23yrs posted by jpymsol

Hex to Ascii

Hello group, I am a virgin in embedded. I have an 68HC11 and want to display a hex value from a memory location on a LC...

14 comments posted 23yrs

posted by peter

14 comments posted 23yrs posted by peter

Detecting Arithmetic Overflow in PICs

Since the mid-range PICs don't have any built-in overflow detection circuitry, this must be done in software. I need to...

15 comments posted 23yrs

posted by no-one

15 comments posted 23yrs posted by no-one

can u tell me what kind of relay being used here

http://main.linuxfocus.org/common/images/article236/linuxlcdpanel_schematic_ big.gif TIA

2 comments posted 23yrs

posted by myLinux

2 comments posted 23yrs posted by myLinux

how to design this datapath unit for DSP using VHDL/Verilog?

Dear all, I want to design an arithmatic datapath unit for digital signal processing using VHDL and/or Verilog. The inp...

1 comments posted 23yrs

posted by mizhael

1 comments posted 23yrs posted by mizhael

Cases for embedded appliances

Hi, I'm working on a small devices, with some simple requirements. The software is mostly done, so we're ready to move...

17 comments posted 23yrs

posted by nullset

17 comments posted 23yrs posted by nullset

Re: learning on programming 8051

>I want to study the programming on the 8051, do you have any reference >web site for me. >I am a starter about this "I....

4 comments posted 23yrs

posted by speff

4 comments posted 23yrs posted by speff