Hello
I would like to try using a small 8051 type device in place of the usual PIC / AVR solution that usually fill the small micro space.
I am aware of the Atmel AT89Cx051 series, but is there any other parts that would meet the following -
thanks,
Colin
Philips 89LPC932
In article , Grzegorz Mazur writes
the Philips/Keil dev kit is about 60USD/Euro and can be obtained from
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ \/\/\/\/\ Chris Hills Staffs England /\/\/\/\/\ /\/\/ snipped-for-privacy@phaedsys.org
Yes, Cygnal has a bunch of these all the way down to $0.99 in quantity one! We support a few in both hardware and software:
-- Regards, Albert
---------------------------------------------------------------------- AM Research, Inc. The Embedded Systems Experts
----------------------------------------------------------------------
Also have a look at the new 89LPC900 family from Philips.
In article , CM writes
Philips LPC901 part in 8 pin DIP? program via ISP port in circuit....
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ \/\/\/\/\ Chris Hills Staffs England /\/\/\/\/\ /\/\/ snipped-for-privacy@phaedsys.org
You might also look at Cygnal. They have a bunch of 8051 parts and some very reasonably priced development packages. I just got their development kit for the part that includes a USB interface and I'm very happy with it so far.
Dave Rooney
Have something to add? Share your thoughts — no account required.
Ask the community — no account required