Would a transmitter or receiver based on vacuum tubes survive and work after a nuclear EMP without a Faraday cage?
Thanks,
Michael
Would a transmitter or receiver based on vacuum tubes survive and work after a nuclear EMP without a Faraday cage?
Thanks,
Michael
Probably... provided the circuit structure itself limits current flow to non-destructive levels. ...Jim Thompson
-- | James E.Thompson | mens | | Analog Innovations | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | San Tan Valley, AZ 85142 Skype: Contacts Only | | | Voice:(480)460-2350 Fax: Available upon request | Brass Rat | | E-mail Icon at
It's more resistant to EMP than semiconductor stuff, but a big enough event would still kill it.
-- www.wescottdesign.com
Yep. During the cold war a lot of Russian planes used tube based electronics, to withstand EMP shock.
** If by Faraday cage you mean a metal enclosure the answer is no.
EMP pulses can be up to 30kV per metre and that is lethal to electronics with any sort of cabling or antenna.
... Phil
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.