RF SPST switch

Greetz and apologies if I missed the proper group to ask this.

I am looking for a circuit/scheme of a simple battery operated wireless switch, and cannot find it anywhere. I keep finding some complicated stuff that requires PIC programming and whatnot.

I am an electronics amateur, but am pretty good with solder, so I need some instructions how to build the simplest switch that IS wireless, and DOES NOT require optical visibility. So, IR is out.

My guess is that some simple RF transmitter/reciever could be built, but I lack the knowlege what exactly to build.

My requirements are as follow: reciever shold be as small as possible batteries for the reciever too transmitter small if possible, if not, nevermind security not an issue, no special coding/128bit_encryption needed if possible some vanilla wire for an antenna range shold be enough to operate the thing through a couple of walls (20-30m indoor, hopefully 100m out)

Is there anyone out there that can help me with my quest? :) Please? :)

Thanks,

Viktor

Reply to
Viktor Ilijasic
Loading thread data ...

you are not trying to build an IED, are you?

i
Reply to
Ignoramus14396

Arg! I had to look that acronym up in google. :-)

No, i'm not. I want a switch to power up a small LED light when I approach the tent or my car in the dark. :-)

Maybe activate some circuitry when i come home, have to think more about that part. That's why one of the requirements was two to three walls of range.

Although, I admit, the application of this kind of switch could be very broad. :-/

Oh, yes, and I asked for an on/off switch. Not just on. :-)

You know how to build one?

Viktor

Reply to
Viktor Ilijasic

If you have anything like Radio Shack in your country, you could just buy a transmitter/receiver pair. I got a set once for about US$15.00, with a transmitter like a key fob, and the receiver used the exact same injection-molded plastic case as a coffee timer, but without the big knob on the front. ;-)

Good Luck! Rich

Reply to
Rich Grise

There is something like Radio Shack...

I know that it's possible to buy remote for mains power switch, dunno if there is a battery operated one.

But I'd rather buy the components myself and build it myself. And would probably pay less that way. :-/

:-)

Viktor

Reply to
Viktor Ilijasic

Hello Viktor,

Years ago I have seen a camping lantern that came with an RF remote (!). Blew my mind, couldn't believe it, couldn't imagine why on earth they designed that. It was bought at a regular camping store.

--
Regards, Joerg

http://www.analogconsultants.com
Reply to
Joerg

You wouldn't pay less, and, given the way you described your skill level, it is likely wouldn't be able to build it yourself anyway. Get the Radio Shack or equivalent device. Or modify a cheap R/C setup to light the LED. Radio Shack sells something called a Zip-Zap - a small R/C car - that might be a good candidate. Maybe your Radio Shack equivalent sells something similar.

Ed

Reply to
ehsjr

Oh, c'mon, give me a break.

I managed to build this:

formatting link

and this:

formatting link

and some other stuff that's not on the web.

Leave it to me to decide what I can and what I cannot, thank you.

Now, if you have something that could help me, I would be grateful.

Viktor

Reply to
Viktor Ilijasic

Why do people have motion sensors activated lights in their back and front yards?

My guess is so they could see their path and door when they approach, maybe where to stuck the key etc. What do you think?

Viktor

Reply to
Viktor Ilijasic

Security. They come on when someone enters an area they are not supposed to. The fact that they light your way is just an extra benefit.

--
Service to my country? Been there, Done that, and I\'ve got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
Reply to
Michael A. Terrell

Hello Viktor,

Not really. They think it increases security, and to some extent maybe it does. But you'd have to discount all those nights where everybody woke up "hooo, there's got to be a bad guy out there..." after the sensor was tripped by a bat or a cat.

Seems everything is remote controlled these days. Some day even our foxes will probably demand cable TV and a remote...

--
Regards, Joerg

http://www.analogconsultants.com
Reply to
Joerg

Hello Viktor,

One more idea just came to mind: Remote doorbells. We have one and the receiver in the bell operates from four D cells. They are in there since more than five years and still fine. These bells are cheap, about $20 in hardware stores (US). I don't know what it would be in your country (Hungary?). Maybe you can find a schematic on the web if you really want to build your own but unless you have most parts already there it's probably going to cost you more.

The transmitters for these bells can be either of two things: A little box hooked up to the primary bell and thus low voltage AC powered (that's what we have) or a small transmitter with a coin cell (that's what you'd probably want).

--
Regards, Joerg

http://www.analogconsultants.com
Reply to
Joerg

I was at the bank today, and in the next line was a guy with a mini-telephone attached to his ear.

All I can think of when I see those people apparently talking to themselves, is a strip in MAD Magazine, back in the '60's, when "transistor radios" were becoming so popular that kids of all ages were holding them up to their ear while walking down the street, so they could listen to their favorite station. In the strip, the author predicted that eventually, the human ear would evolve to hold the radio in place, so they could listen to the radio with hands-free!

Odd, how prophetic satire can be sometimes. ;-)

Cheers! Rich

Reply to
Rich Grise

Check out the remote control at

formatting link
It's pretty much exactly what you want, with a few options. Not a kit, but if I were looking for a simple remote control device, I'd definitely buy this.

Cheers!!!!

--
Dave M
MasonDG44 at comcast dot net  (Just substitute the appropriate characters in the 
address)

They call it PMS because Mad Cow Disease was already taken.
Reply to
DaveM

Reply to
quietguy

Ok, apologies if I misunderstood your description of your skill level.

Well, I already did, but you didn't like it. So I'll try again with something different:

formatting link

You may be able to use the transmitter & receiver they offer, without the encoder and decoder. You decide.

Ed

Reply to
ehsjr

Well, that is an option. I'll have to check out what they have.

Viktor

Reply to
Viktor Ilijasic

Mmm! Now this is nice! Thanks! :)

But the size is a bit more than I would like. Well, I'll have to figure something out.

Thanks again,

Viktor

Reply to
Viktor Ilijasic

Croatia.

Thanks for suggestions.

Viktor

Reply to
Viktor Ilijasic

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.