Personally I do not understand why people do similations of circuits that you can solder together in five to ten minutes

with power.

I surely have a pile of it.

often

(typically

A few percent of the time, I get something weird when I think I'm buying SMAs or some such. But the stuff is so cheap, it's worth the risk. It's great to have a couple of boxes stuffed with miscellaneous coax and semi-hards and hardlines, with sundry connectors.

John

Well, you could wrap the little beasties in aluminum foil with something absorbent - clay cat litter comes to mind- and bury 'em in the coals next time you make a fire.

That will humiliate most potting compounds.

Thanks, much to learn :)

Good for now, I still prefer soldering, over getting too far into a simulated world.

What I want eventually is a way to record energy transferred in a data logger product on top of the energy controller, so this helps me visualise the problem and maybe get some ideas for a solution there.

Gotta be simple, 'cos I'm using 8bit PICs at the moment, idea is to record something that can be number crunched at view time on a PC, so the data logger can record number of pulses or sample I and V at regular intervals, whatever is easy and accurate enough.

Since it has to sample V at intervals, it depends whether the controller stays in discontinuous switchmode all the time, or goes continuous at higher power, that I'm not sure of yet. I imagine it will, which means I need to do both counting and sampling.

Almost time to fire up a prototype and take some real measurements.

Grant.

Interesting, last time I tried heat it was too abrupt, broke the ferrite, your method loses the former, but we can't have every thing for free ;)

I don't make fires here, I think we can have outside fires of garden material only on Tuesdays and Saturdays not in Summer, yet the place stinks of slow-burning wood heaters in Winter. Definitely an outside cooking task though, maybe a temp controlled old toaster oven, with slower temp rise control than what comes standard.

Grant.

Watch out trying to use any hard setting compounds. They shear SMD parts and they cause magnetostriction on cores of chokes and transformers. Yes, it matters in some cases.

can solder together in five to ten minutes

Maybe it is due to a lack of education.

I should be jailed for putting the biohazard that your corpse will make into the ground.

ailable

on

can often

ting, or

(typically

ng that

might

hat

lain old

I like to get those Pomona cables with the stress relief at Excess when they show up. [I assume some company has gone under and cleaned out the lab] I've got some that are BNC to WTF. Cheap enough that I got them just to have them. And if I find something with a WTF connector, I'm ready.

available

often

testing, or

(typically

that

old

Reversed threaded WTF connectors are handy, too.

John

Hey, I've got a pair of what I thought were push-on N connector to SMA adapters -- purchased from Mr. Tinaja Quest himself -- that turned our to be "push-on something sort-of-but-not-exactly-identical-to-an N connector to SMA adapters." Don had said he didn't k now exactly what they were either, so no hard feelings there.

I should probalby just toss the things out, I suppose... can't imagine I'll ever run into the slightly-non-standard N connector they need...

---Joel

WTF is a WTF connector?

John

Another threat that will bear witness to your warped and dangerous personality.

I got a bunch of ebay push-on-SMA cables that don't.

John

Yes.

John

That's all you got?

John

Yes?

Wack That Fool! ;-)