Have you tried Casa Ramos? They operate half a dozen restaurants around Sacramento. One right here up the hill in Placerville, off Missouri Flat. Their macho burritos are really good. And huge, about the size of a DSL or cable modem.
What I am sorely missing just like Terry is missing Mexican is a good Greek restaurant. In Germany we had them at every street corner. Not here. But it has to be good, where they make their own tzatziki (we do...).
Regards, Joerg
http://www.analogconsultants.com
Didn't find your answer? Ask the community — no account required.
Yes, absolutely.I don't think the OP specified what sort ofHe's...
J
Joerg
Hello Rich,
Umm, yeah. We have a saloon in town, good ol' country music. But that's over two miles and I don't like to drive after a night in there. No taxis out here :-(
Regards, Joerg
http://www.analogconsultants.com
T
Terry Given
Nope, a Kiwi who developed a taste for Tex Mex after living in USA for 3 years.
Tell me about it. I cant even find a Greek restaurant in Auckland, and there are 1.5E6 people there :(
There is a good one in Christchurch, but thats a pretty long walk too.
I go to a Teppanyaki restaurant in Auckland quite a bit, great food and entertainment too. My fiancee lives in Auckland, so Im up there several times a week. most of my customers are there too.
Wednesday was spent on a chicken farm in Helensville. Fascinating operation, but I smelled like chickenshit all day long :(
Cheers Terry
J
Joerg
Hello John,
So did the old radial engines during approach and the pilots didn't complain. Except about the Castor oil that spewed out because it supposedly acted like a laxative...
Regards, Joerg
http://www.analogconsultants.com
J
Joerg
Hello John,
Question: Didn't you just roll your own around a LAN transformer? Just pot that up, print HLT764 or soemthing on it and sell them ;-)
The local availability of good chocolate and beer depends on how far away you are from the next Trader Joe's.
Regards, Joerg
http://www.analogconsultants.com
J
John Larkin
All programmers should come equipped with an engraved calibration factor. 10:1 (actual/estimated time-to-complete) isn't at all unusual.
John
J
John Larkin
Pleeeeease tell me who makes it!
John
S
Spehro Pefhany
Exactly, a good faux-Irish pub (among others), good Chinese, great dim sum, good Vietnamese com/pho/bun, good Korean, okay Pakistani, very good Iranian and Lebanese, nice South Indian dosas, fairly good Indian, okay Thai, okay Greek, good Carribean, good (but a bit expensive) sushi are all within 1-2km (10-20 miles for the very best selection), but a really good SoCal-style burrito is just not available AFAIK. Just Taco Bell (barf) and some independents that are mediocre at best.
Best regards, Spehro Pefhany
"it\'s the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
K
Ken Smith
How about the LT1617?
How about an LT3014?
They rely on the load capacitance to set the loop gain. The pass element is running as a source. The feedback is all that makes them constant voltage.
Send your wide to fetch it and place it in the kitchen for you.
The same reason Ford can claim to be a car company. Making crappy cars/chocolate still makes you a car/chocolate company.
--
kensmith@rahul.net forging knowledge
J
John Larkin
Isn't Foster's the great aussie beer? It tastes, to me, like a bad batch of Budweiser.
John
J
John Larkin
If you're not part of the solution, you must be part of the precipitate.
John
K
Ken Smith
In article , John Larkin wrote: [...]
I've got you beat:
+24V
+17V
+15V To power the 7812
+13V Nominal \\ Called 13 so we don't hook them to the
+13V Nominal isolated / +12V by mistake.
+12V
+12V The other
+7V
+5V
+3.3V
-5V
+15V \\ Isolated
-15V /
+10V \\
+5V Isolated
-5V /
Thats 16 power supply voltages total in the system. They aren't all on the same PCB however.
--
kensmith@rahul.net forging knowledge
J
Jim Thompson
Sno-o-o-ort! That's still funny after two Sake Martinis and several rounds of Sashimi ;-)
...Jim Thompson
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC\'s and Discrete Systems | manus |
| Phoenix, Arizona Voice:(480)460-2350 | |
| E-mail Address at Website Fax:(480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |
I love to cook with wine. Sometimes I even put it in the food.
J
John Larkin
Kinda big for this app. SO-8 is kinda big, too. I need to drop +10 by about 0.65 volts, which could just be a diode, but I'd prefer it to be stiff [1]. +12 is available, so just a divider from the +10 rail into the 317 adjust pin would give me a nice steady 9.35.
I suppose I could put parts on both sides of the board.
as, lack of.
John
[1] please, no riffs on that one.
M
mrdarrett
Well I have to try that, thanks!
The burrito standard I compare all other burritos to is the Chicken Burrito, with Black Beans, at Guadalajara Taqueria in Davis. A friend took me there during my senior year at UC Davis, and I was hooked ever since.
formatting link
When I travelled to the Philippines, the one food I was craving was chicken burritos. While I was there, I was able to concoct apple pie, cookies, chocolate mousse cake, ice cream (just throw the ingredients together and freeze!) and simple pizza, but not burritos. No sour cream available there... :(
Chipotle's burritos come in at a distant second - but are better than nothing. ;)
Silver Dragon and Hunan (all Chinese restaurants in Davis) serve top notch General Chicken... but this one place in Elk Grove comes in pretty close too. I think it's called Panda Garden.
Sacramento has the best Chicken Pho (Vietnamese soup) ever - at Hoa Viet. (One on Bradshaw, one on Stockton Blvd.)
Sounds like we engineers should go into the restaurant business. ;)
On second thought... naah.
J
John Larkin
What, no all-you-can-eat $7.95 sushi joints?
John
M
mrdarrett
My first-year chemistry professor had a poster with those words on his office door - with a picture of a man huddled at the bottom of a giant filled test tube.
Is it snowing in Christchurch yet? One of these days I'd like to go skiing somewhere in south island...
Michael
J
John Larkin
The ratios are just the wrong side of right, and I'd need a secondary regulator anyhow, and all that would be a tad big. I really want +12 to regulated -5 at 200 mA in maybe 0.5 sq inch.
Not far, actually, now that we've moved. I'll check it out.
John
J
John Larkin
I did look at that, but all those parts (2 inductors!) were off-putting.
20 mA won't cut it here. Thanks anyhow.
John
J
John Larkin
Yikes, sort of a dubious victory. What's it do?
Actually, if you want to get technical, this board has 87 distinct supply rails...
formatting link
John
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required
Report Content
You are reporting this content to the moderators. They will look at it
ASAP.