Völlig OT
Am 07.12.19 um 11:34 schrieb Der Habakuk.: > Am 07.12.2019 um 10:35 schrieb Hartmut Kraus: >> Am 06.12.19 um 22:41 schrieb Der Habakuk.: >>> Gerade im Bereich Hartz-IV, Sozialamt, Grundsicherung vermute ich, >>> und motzen, >> >> Das...
12 discussions on ElectronDepot about the National Semiconductor LM358: what owners asked, what went wrong, and what fixed it.
Am 07.12.19 um 11:34 schrieb Der Habakuk.: > Am 07.12.2019 um 10:35 schrieb Hartmut Kraus: >> Am 06.12.19 um 22:41 schrieb Der Habakuk.: >>> Gerade im Bereich Hartz-IV, Sozialamt, Grundsicherung vermute ich, >>> und motzen, >> >> Das...
Read and comment. AoE x-Chapters, High-Speed op-amps section, DRAFT. Recall, the AoE x-Chapters are advanced material that was meant to come after each relevant chapter, can skip on a quick first read, go back later for detailed...
Hi, This message is related to my earlier request for advice in the topic 'finding electronics design and fabrication expertise for a project'. Because of the kindness of the group members here, I am posting more details about the project...
I use the LM358 by the bucket load because they are cheap. I also usethe LM358A for the better offset voltage spec.I'm always on the look out for an alternative with lower offset thatis still cheap. I've just come across the...
Can someone recommend a single supply op-amp with better specs than an LM358?Thanks,Ken McDonald
I have a digital scale I took apart that uses a pressure sensor, 4digit display, hex inverter and an unknown chip that has Charder 3805written on it. Since it's old I have no way to figure out how itworks. so, is there any schematics out...