10 discussions on ElectronDepot about the Altera EP1C12: what owners asked, what went wrong, and what fixed it.
Hi,I've seen this prototype board from Altium that seems to have a very good price: comes in two flavours: one with an Altera Cyclone series EP1C12F324C8 and the other one with a Xilinx Spartand 3 XC3S400-4F456C. Both options have the same...
Howdy all,I'm looking to get an FPGA development board sometime soon. When Iwas in college, I played with what was probably the Xess XSB-300E (funstuff: we made a PCMCIA interface and plugged it into an iPaq... butthat's another story). ...
Hello All,I've been designing with Xilinx FPGAs for a while so I'm used to the"Slice" concept. I'm looking at Altera's Max II as a nice possiblesolution for a design.I took my VHDL code and it synthesized to 40 Slices in a Spartan III.Then...
Witam wszystkich, którzy tu zajrzeli.Zainteresowałem się trochę układami FPGA i chciałbym siędowiedzieć czegoś więcej na ich temat (tak, tak, wiem o linkach ijuż je mam).Na początek może kilka słów o sobie... Z zawodu...
Hi,I'm about to design the hardware for a new variable speed drive controller.Since I'm largely targeting high power systems, I certainly don't need to squeeze the last buck out of the controller.I am looking for processing power...
In my project, which uses an Altera Cyclone EP1C12, I need to generate a lot of different frequencies, such as f=10Mhz, 1MHz, 2.5MHz, 250kHz, etc.I used counters but quartus' design assistant complains that I'm using gated clocks. Are...