Hi,
I have a Gumstix running Linux as follows:
# uname -a Linux gumstix 2.6.11gum #1 Wed Feb 1 16:53:57 PST 2006 armv5tel unknown
I am using the MMC card to collect data from an application and need to periodically swap the card. I have tried the sequence below but unsuccessful.
# umount /mnt/mmc ### Pull the MMC card out from the slot ### Put the same card back into the slot # mount /mnt/mmc mount: Mounting /dev/mmc/mmc0/part1 on /mnt/mmc failed: Input/output error
Is there a way to do this at all? If so, what should be the proper sequence/procedure?
Thanks for any help. P