Embedded Programming

Baud 1200

Hi, I used ATMega16 UART to communicate with a target device which is of baud 1200 but failed. I then tried to communic...

6 comments posted 21yrs

posted by leonlai2k

6 comments posted 21yrs posted by leonlai2k

very new to embedded programming - can you look at my code for an AVR?

Hi - I'm attempting to program an AVR so that through a computer (through the serial port) one can easily control how f...

4 comments posted 21yrs

posted by mnoone.uiuc.edu

4 comments posted 21yrs posted by mnoone.uiuc.edu

Cold Heat Solder

Anyone out there try one of these? http://www.coldheattools.com I haven't heard too much about them and would like some...

7 comments posted 21yrs

posted by rich_NOSPAM_

7 comments posted 21yrs posted by rich_NOSPAM_

[ANN] AVRcam v1.1 real-time image processing engine

The AVRcam version 1.1 is a small, low-cost image-processing engine intended to bring a truly affordable and extensible...

1 comments posted 21yrs

posted by john

1 comments posted 21yrs posted by john

need help finding voice modem

I need to find a basic rs232 voice modem for a proof of concept device. The final product will have the functionality b...

2 comments posted 21yrs

posted by joe

2 comments posted 21yrs posted by joe

wifi home radio player

Hello All... I want to build a portable Wifi Internet Radio so I can stream music from my favorite stations (the applia...

4 comments posted 21yrs

posted by ideo64

4 comments posted 21yrs posted by ideo64

Externally connecting internal IDE drives

I have a very large and complex rack-mounted box which contains a 14-slot ISA bus passive backplane [physically divided...

14 comments posted 21yrs

posted by ndrez

14 comments posted 21yrs posted by ndrez

VM Design UMPS

Is any one here using UMPS. I understand the owner of the company passed away and the product has died also. Therefore,...

0 comments posted 21yrs

posted by wb4guk

0 comments posted 21yrs posted by wb4guk

Motorola MC68HC908QT4 evaluation board; why 5V?

The Motorola/Freescale $25 eval board uses a 78L05, and runs the MCU at 5V. Why, when the data sheet says it expects 3V...

1 comments posted 21yrs

posted by no

1 comments posted 21yrs posted by no

8051 Development using Linux

For anyone interested in developing 8051 applications under Linux, I have just updated my 8052.com web page with detail...

0 comments posted 21yrs

posted by ruffrecords

0 comments posted 21yrs posted by ruffrecords

Wiggler with WinXP

Hi all, I tried to use the Wiggler compatible JTAG Adapter from Olimex with OCD Commander. Under Win2K it works fine. O...

10 comments posted 21yrs

posted by thomas.motz

10 comments posted 21yrs posted by thomas.motz

Can I reburn an OTP processor???

Can I reburn a chip like the PIC12C508 OTP part? Assume you have a jump table in high memory. On powerup, the processor...

17 comments posted 21yrs

posted by spamme0

17 comments posted 21yrs posted by spamme0

Choosing a PC104

I have a project that I will be doing on a PC104 system. Before I call the dozens of vendors who don't give pricing inf...

2 comments posted 21yrs

posted by http://www.guymacon.com

2 comments posted 21yrs posted by http://www.guymacon.com

Hi. my friends let's make some money together!!

Hi to all, I would like to share with you this reasonable opportunity of making extra income stream which i've found on...

0 comments posted 21yrs

posted by weshop4you

0 comments posted 21yrs posted by weshop4you

Multi-threaded Sockets Application

Hi all, I am in the very early stages of writing a multi-threaded sockets application to enable me to communicate using...

7 comments posted 21yrs

posted by jason

7 comments posted 21yrs posted by jason