Embedded Programming

SoC w/802.11b (for wireless temp/light sensor)

I'd like to use an inexpensive micro-controller (like Atmel's AVR -- I like the Butterfly demo board but would like oth...

8 comments posted 20yrs

posted by yogieric

8 comments posted 20yrs posted by yogieric

what's wrong with a pic ?

just curious ... i keep hearing, "i hate the pics", everytime i turn around. someone is always dissing the pic processo...

192 comments posted 20yrs

posted by webnews1

192 comments posted 20yrs posted by webnews1

cs8900a always returning 0x5555

Hi- I am working on developing cs8900a driver under linux 2.4. The system configuration is: arm9+linux(kernel 2.4), the...

5 comments posted 20yrs

posted by aimingoo

5 comments posted 20yrs posted by aimingoo

Connecting external RAM to TSK51 processor (using Altium Designer and the NanoBoard)

Hi! Sorry if this is not the right group for the question but it seems to be the closest to the topic I could find. The...

4 comments posted 20yrs

posted by nema

4 comments posted 20yrs posted by nema

Re: More on Coldfire BDM project

Subject: More on Coldfire BDM project From: "Jim Adamthwaite" Date: Sun, 21 May 2006 07:04:31 -0700 Lines: 10144 Good g...

4 comments posted 20yrs

posted by albalmer

4 comments posted 20yrs posted by albalmer

Problem: How to specify Library in ld-Link-Script?

Hi all! I'm trying to get BootUp-code for x86 (Pentium3) architecture working, using gcc an ld. Because after bootup on...

0 comments posted 20yrs

posted by tpo_technix_REMOVESPAM

0 comments posted 20yrs posted by tpo_technix_REMOVESPAM

Communication between DS1307 RTC and 8051

Hi guys, Need the souce code for interfacing the DS1307 RTC to 8051. Have not developed any because if its been done bef...

1 comments posted 20yrs

posted by acetracerbullet100

1 comments posted 20yrs posted by acetracerbullet100

PWM ICs

Hello Everyone, I've lurked for a time, but this is my first post. I'm using an LPC2294 i an automotive application. Th...

13 comments posted 20yrs

posted by steve.clevenger

13 comments posted 20yrs posted by steve.clevenger

I need a disassembler for AMD 188

Hi, I need a disassembler for a Amd-188 microcontroller. Please send me some links for a good one. Thanks. S.L.

29 comments posted 20yrs

posted by sangleen

29 comments posted 20yrs posted by sangleen

USART, setting of TRIS register needed (PIC 16F-types) ?

I'm a little bit confused about the TX and RX pins in UART mode. I checked several PIC types: If you read the text care...

2 comments posted 20yrs

posted by S.Mientki-nospam

2 comments posted 20yrs posted by S.Mientki-nospam

SPI modes

Hi, I'm trying to understand what are all the valid configurations for SPI devices both in simplex and duplex case. Fro...

0 comments posted 20yrs

posted by imre.deak

0 comments posted 20yrs posted by imre.deak

Postdoc / Summer Internship Opportunity on FPGA-Based Numerical Algorithm Design

Accelogic is seeking a talented research intern or Postdoc with FPGA experience, to assist with FPGA implementation asp...

0 comments posted 20yrs

posted by rafaelcns

0 comments posted 20yrs posted by rafaelcns

SMT standoff ??

Can anyone recommend a source for a surface mountable standoff ?? (In particular I need very small 2mm high standoff to...

4 comments posted 20yrs

posted by sja

4 comments posted 20yrs posted by sja

msp-gdb message?

Hi, does anybody know what this gdb error message means? This GDB was configured as "--host=i686-pc-cygwin --target=msp...

3 comments posted 20yrs

posted by uid09012_ti

3 comments posted 20yrs posted by uid09012_ti

CPLD (CoolRunner failures)

has anyone experienced problems when operating Cool Runner (XPLA3) CPLDs near the capacity of their macrocells? specifi...

25 comments posted 20yrs

posted by neilchamberlain

25 comments posted 20yrs posted by neilchamberlain