Dear All I modified my vxworks ppc node bootChange parameters to boot the kernel image from a Linux node , as the following: 'boot device : motfcc unit number : 0 processor number : 0 host name : craftpc file name : /tmp/vxWorks.ppc inet on ethernet : 172.18.212.1:ffff0000 host inet : 172.18.128.1 user : www ftp password : 123456 flags : 0xa target name : bs other : motfcc' But when I boot my vxWorks node, it will hang on the following message : 'Attached TCP/IP interface to motfcc Attaching network interface lo0 ... done Loading ... 2217740' It will wait here endlessly . I tried for tcpdump on my Linux node , as the following : '[root@om tmp]# tcpdump |grep 172.18.212.1 tcpdump: listening on eth0
08:53:14.121540 arp who-has 172.18.212.1 tell 172.18.212.1
08:53:14.131540 arp who-has om tell 172.18.212.1
08:53:14.131540 172.18.212.1.1024 > om.ftp: S 2078917053:2078917053(0) win 8192
08:53:14.131540 om.ftp > 172.18.212.1.1024: . ack 2078917275 win 5792 (DF)
08:53:14.141540 172.18.212.1.1024 > om.ftp: R 2078917275:2078917275(0) win 8192
08:53:19.961540 172.18.212.1.1024 > om.ftp: S 2078917053:2078917053(0) win 8192
08:53:19.961540 om.ftp > 172.18.212.1.1024: S 3380833172:3380833172(0) ack 2078917054 win 5792 (DF)
08:53:19.961540 172.18.212.1.1024 > om.ftp: . ack 1 win 8192 ' As you see, ftp process is in progress . Can you please let me know why my vxworks node does not come up and it just waits on Loading with no end? Thank you
--------------------------------------- Posted through