Latest threads in Embedded Programmingshow only best voted threads

Subject Author Posted Replies
 
What do the RX and TX bytes number mean?
Hi, I have a Sitara SK board, similar to BeagleBone Black board. There are below messages on its Ethernet ports. What do the bytes numbers mean? Are they used in running ifconfig? Thanks,...
2
2
 
What password is for this embedded Linux board?
Hi, The Sitara Starter Kit, which is similar to a BeagleBone Black board, has no password when I login in at UART serial terminal, i.e. after I enter: root, m335x-evm login: root it will login without...
4
4
 
How many computing power is lefe for a Beaglebone?
Hi, I have a Beaglebone like board, which has CPU clock rate 800MHz. It runs a Linux. I find an audio project, which needs CPU power 200MIPS for computing. The audio stream can tolerate some latency...
5
5
 
Microchip PICKit3
Are these things just utterly useless? It would appear* that the USB handling in MPLAB-X is poorly tested. Might be that "grab reset on the DUT" is the problem. *can't really tell which end of the...
6
6
 
Add Cloning Capabilities to RCM3319
Hello All, I am new to the forums, previously have been lurking throughout the forums. I have a rabbit core 3319 micro controller that has source code that I no longer have access to. I was wondering...
 
What is the field (separated by :) in the file path listing?
Hi, I posted this question on BeagleBone group, but there is no reply to my question. I hope that somebody here can help. I see the following message from a link: root@bbb-deb:~-- $ ls -l...
10
10
 
LED video sender and receiver working principle
Hi guys I was actually doing a project which involves high end processor and fpga for the display of the video on a LED Display panel which might many of you have seen in public places or seminars or...
 
What does 'Programming experience with C on Linux is mandatory' mean?
Hi, I am an embedded engineer, having some C experience. There is a position wh ich says: Position: Embedded Development Engineer .Programming experience with C on Linux is mandatory Here is Job...
6
6
 
Announcement: New code generator from state - and activity diagrams
Hello list readers, a new version of the SinelaboreRT code generator is available. The code generator supports the generation of clean and robust C / C++ code from activity diagrams and state diagrams...
 
Labeling technologies
Hi, Aside from technologies mandated by specific industries (PostNet, ABC Codabar, UPC, EAN, etc.), are any *print* labeling technologies still in favor for "application specific" use? Or, is this all...
 
Don't do this
I'm working on a comms program, and listening to "Cosmos". I just hit a bug, because I'd typed "totalWorlds" instead of "totalWords". Hmm.
4
4
 
What use of 'AL condition' in ARM IT block?
Hi, I read the following on IT block in ARM Thumb2 instruction. I don't understand the last sentence on AL to get the changed behavior. Could you explain it to me? Thanks, ///////////// A8.6.50 IT If...
1
1
 
model of computation?
Hi, I'm more of a hardware guy so I'm not sure if I'm using the correct terms.. .. I have a hardware system build around a microcontroller. The mC is programm ed in C, no OS. The system accepts...
4
4
 
Where is "the module name" in this example?
Hi, When I read TI SYS/BIOS User Guide v6.41, page 116/256, I cannot find the module name in the gate in the below code example. I wonder whether my comprehension has problem or the writing is not...
1
1
 
How is "tiva-tm4c129.c' used in Tiva-C TivaWare?
Hi, I have a Tiva-C 1294 LaunchPad. Now I am familiarizing the lwIP project. It is found that the Ethernet relevant initial functions are included in file:...
1
1