Latest threads in Embedded Programmingshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
OT - Project/Task/ToDoList tracking?
Is anyone using a project/task/ToDoList tracking system that they like? I'm looking for a new/better way to track projects. Needs: Multi user, preferably client/server. Shared projects, tasks, lists....
4
|
14 years ago
|
4 | |
|
Need help to start with USB
I need to read/write sectors on USB flash memory mass storage. (I hope this is the correct title) AFAIK, this has two requirements: 1. hardware: USB connection. 2. software: handshaking with USB...
12
|
14 years ago
|
12 | |
|
Linker Script Question
For the sample linker script below I have two questions.... 1) How can I make sure the image between the end of output1 and the beginning of output2 is filled with 0xff - or a value of my chosing? 2)...
3
|
14 years ago
|
3 | |
|
I need to write a command protocol divided in 3 layers
Hello I need to write a command protocol divided in 3 layers. A data link layer, a network layer and an upper layer. I'm programming this in C. I would like some internet links that shows some...
14
|
14 years ago
|
14 | |
|
Decent debugger for linux on embedded devices
I have been spoilt using MS Visual Studio for the last few years. Now I am back to using gdb and ftp'ing to the target. Tell me there is a better way. Ie, compile, deploy and debug (think IDE). Target...
6
|
14 years ago
|
6 | |
|
AT91SAM7 USART
I have an issue with the baud rate clock on a AT91SAM7S processor. The processor will run from an external 18.432MHz crystal and run at this frequency or will divide this down to 1.152MHz when it is...
—
|
14 years ago
|
— | |
|
nibz embedded example under construction ideas wanted
Hi has been started in earnest. The idea to split the UFM on MAX II came to me last night. So far 23% logic resources have been used on the 1270 for just the processor. I am expecting the 16 to 8 bit...
3
|
14 years ago
|
3 | |
|
TMDS to LVDS
Hi folks, I need to convert TMDS to LVDS. Im sure someone has done this before, so rather than reinvent the wheel, I'd like to ask what chips are suitable for this. I need to drive a panel with 3 data...
3
|
14 years ago
|
3 | |
|
Spec2000 benchmarks : runtime with Simplescalar
Hi, I want to run few Spec2000 benchmarks on simplescalar but I do not know how much simulation time these benchmarks take. Does anybody know which benchmarks take a lot of time to run and can be...
—
|
14 years ago
|
— | |
|
Seeking comparisson of free RTOS for embedded
Sorry if this is a FAQ, I have googled around and don''t find much. What to I want from an RTOS? - The standard message/timer/mutex/thread stuff - Some sort of abstraction layer, so that I can unit...
4
|
14 years ago
|
4 | |
|
Problems with simulation of amforth in VMLAB...
Hi, I'd like to know if anybody has succeeded to simulate the AVR running amforth ( ) in VMLAB ( ). I'd like to use this setup for simple tests without using the real hardware. Unfortunately, even...
1
|
14 years ago
|
1 | |
|
Bug in Avrstudio (4.16)?
Dear all, I used ATMega88 with avrstudio (4.16) and mk2 emulator. I found that the avrstudio displays the flash memory size to be 4k rather than 8k after selecting the device. I now had not enough...
1
|
14 years ago
|
1 | |
|
Interfacing Spartan-3 to PC
Hi, I have the Xilinx spartan-3 development kit and I am tying to connect it to PC troughs Ethernet connection. On the board there is a physical layer transceiver (DP83847). My data is stored in a...
1
|
14 years ago
|
1 | |
|
Advice for the best Touch Panel A/N circuit (or resistance-to-digital)
Hello, I want to digitize some sensors and a touch panel with a FPGA. FPGA allow a certain flexibility but good external analog parts are necessary. In my context, the trouble comes from the screen's...
7
|
14 years ago
|
7 | |
|
Richard Stallman is responsible for the shrinking economy -- PART 3
Well, Can someone remind me what was talked about in PART1 and PART2 of above subject ... ... concisely. please? -- Orbis Terrarum
22
|
14 years ago
|
22 |