Latest threads in Embedded Programmingshow only best voted threads

Subject Author Posted Replies
 
High speed (230K) RS232 drivers?
Gee Wee, the customer is not happy with 115K. We already determined that TI's MAX232 works up to 115K and the MAX3232 won't even work at 115K (although it claims to work). I know there are...
49
49
 
p2020 and Micron MT47H64M16HR memory and u-boot
Hi, We are debugging a system equipped with p2020 processor and micron MT47H64M16HR DDR2 memories. Unfortunately we can't get u-boot loading correctly to the DDR. We've managed to get u-boot loaded to...
1
1
 
help with finding a wifi development kit
I need a wireless IEEE 802.11 b/g/n infrastructure (Wireless Router/AP), with some applications (web server and FTP server) running on it. and it should be programmable. anybody can help?...
3
3
 
"Talking" to a "busy" application
Hi Cassiope, Yes, I currently have a "control channel" that the OS uses to interact with each task/process. I had thought of embelishing that mechanism but think I want/need to create a similar, but...
4
4
 
IDH22 D9LHT memories - any datasheet?
Hi, I'm debugging an embedded system which is supposed to be equipped with DDR2 memories. Chips are marked with "IDH22" and below with "D9LHT". The symbol on the right side is the Micron logo. I can't...
1
1
 
Quick SBC with 16-bit AD and Ethernet ?
Hi Folks - I'm looking at a quick project that needs: - 16-bit AD data acquisition, - Ethernet connectivity - modest processing requirements (32-bits best) - ideally contemporary ARM supported by lots...
2
2
 
New Job Req : Embedded Software Engineer– Beverly, MA– 12 Months Contract Position- forward your resume to v ikramp@kaizentek.com
Hi, Good day. We are looking for Embedded Software Engineer=96 Beverly, MA=96 12 Months Contract Position Position 1: Embedded C++ Engineer - Positions Available: 2 Job Description: =95 Good in C#,...
 
Microchip PIC12LF1840T48A is a 14-Pin Microcontroller with a radio
Has a sub-GHz transmitter. Targeted for RKE rolling-code application. Article includes a block diagram. Bill Giovino, Executive Editor
 
SD Voltages
I am reading a CPU eval board data sheet that says it supports 1.8 volt interface for MMC cards. They don't seem to support SD cards. Looking at wikipedia they say, "All SD card families initially use...
1
1
 
Rowley Crosswork Debug and CCLK
Hello, does anybody know why the peripherals clock is not working when simulating my application with Crosswork Debug? My board is an Olimex OKI-H5003, with an ARM7TDMI Oki core. I want to specify...
2
2
 
Gesture Recognition (2 of 2)
[Same comments from part 1 apply] I'll skip over the chronology behind my current implementation. Assume I've abandoned/refined various approaches because they couldn't provide "acceptable"...
4
4
 
Gesture Recognition 1 -- The Back Story
Hi, [advAPOLOGIESance for the length of the post -- but there seems to be a lot of ambiguity in this field so I try to define terms that I use. I'll post this in two parts: this first part outlining...
 
p2020 - explanation of ddr parameters in boot_format config?
Hi, I'm debugging the p2020 based system. When building the u-boot loader, it is essential to provide good DDR parameters in the boot_format configuration file. Unfortunately I can't find any...
3
3
 
MCC 68K download
Where could I download Microtec asm68k, MCC68k, and lnk68k version 4.5 and manuals of them?
2
2
 
Selfsustained Web server, like IOBridge
Hi I have been looking at the IOBridge 204 which can let you control stuff via the internet or Iphone etc. (Internet of Things) But, I am a bit worried about the fact that it depends on the servers...