power hum

Can anyone point me to a circuit for eliminating a 60 cycle power hum. I have a small transmitter connected to the audio output of my satellite decoder and want to connect a receiver to the aux input on my Hi-Fi. It works fine using a 3v battery supply but when connected to a commercial battery eliminator, there is an unacceptable background hum. I think a need a filter of sorts.

Thanks Charles

Reply to
Charles
Loading thread data ...

The first thing to try is to connect a large value capacitor across the eliminator output to smooth the ripple the rectifiers produce. A capacitor of at least 1000 uF rated for at least 6.3 volts should help. Make sure you connect the positive end of the capacitor to the more positive side of the supply.

--
John Popelish
Reply to
John Popelish

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.