London
In the USAF, in avionics, they were routine. At one base where I worked, the whole shop was a screen room, (which they called 'shield room') to the extent that they used incandescent lights and the air conditioning was woefully inadequate. The wall paneling, ceiling, and floor were sheet metal.
It was pretty quiet (electrically), however. :-)
Cheers! Rich
Well, the only thing is, he's wrong[1]. A "Faraday" cage does _not_ shield you from magnetic fields - electrostatic, yes, if it's properly grounded, and _electromagnetic_ (not magnetic), more commonly known as RF radiation.
And if you use window screen, it's transparent above the wavelengths on the order of the screen mesh size or so.
Cheers! Rich
Just make the box out of CoNetic:
Cheers! Rich
Not easily. These alloys are fragile (bending wrecks the permeability), seams will leak magnetically, and you still need an absurd wall thickness/box size ratio to get good shielding. And they cost a fortune.
John
"John Larkin" "Phil Allison"
** Kindly calculate the attenuation figure at 50Hz for a box the size of a toilet cubicle made from aluminium or copper fly screen.That is what the game is here.
....... Phil
So true !
Copper foil makes a decent 'belly band' for transformers though. It's only recently I had occasion to get into that side of things.
Graham
"Eeyore"
** Wot - fit a copper flux shorting strap around an R-core ??Least it can be done, I suppose.
Unlike with a toroidal.
........ Phil
Actually I was thinking of one on a ferrite 'E-E' core I did a while back. Reminded me of some I've seen wrapped round E-I 50Hz transformers though - typically those out of Asia.
Very true. Haven't ever needed it but that's a good point.
Hmmm... Quite.
Graham
The use of "screen" is a new stipulation. Of course, screen isn't very conductive, so the eddy currents will be far lower than for a solid sheet of metal.
Still, the magnetic attenuation isn't "** exactly" "ZERO" as someone has recently claimed.
John
"John Larkin"
** No it is NOT !!!!!Read the OP's first post.
" I'm planning to build a 2m x 2m Faraday's cage/booth to protect active electric guitar pickups from external electrostatic and electromagnetic noise 20hz-96khz "
What the HECK did YOU imagine such a booth is like ??
** So low as to be insignificant at 50 Hz.** Wot a pedant !
Maybe you can say how to make a usable guitarist's booth with 150 dB attenuation as was claims by that Rene idiot.
" For the lower frequencies, iron would be the choice. I'd expect an attenuation in the order of 150dB or better. "
...... Phil
Well, we did discuss using copper sheet and aluminum foil. And I did suggest that sub-mm layers wouldn't attenuate 60 Hz fields much. Even foil would be usefully effective against h-fields at his high end, if he indeed had any floating around.
Actually, I'm an engineer, and I like to understand (and predict, when it comes down to it) numbers no matter their magnitude. I suppose that when you say...
"There is ZERO attenuation of low frequency magnetic induction."
and clarify that with
"** Exactly"
then I'm being a pedant to assume you actually meant it.
You didn't actually mean it?
John
Why not?
John
Not very practical to apply one due to mechanical issues.
Graham
"John Larkin"
** Try answering the damn question - asshole.See the word "cage " in the heading ??????
Mean anything to you ?
** And just like so many of them, a useless, PITA autistic pedant....... Phil
It means pretty much this to me...
"Faraday stated that the charge on a charged conductor resided only on its exterior, and had no influence on anything enclosed within it. To demonstrate this fact he built a room coated with metal foil,..."
So the original Faraday "cage" was in fact made of metal foil.
Does that answer the damn question?
John
Whatever - it'll be like a red rag to a bull as far as Phil's concerned you mischeivious person !
Graham
"John Larkin"
The heading and the OP's first post describe his intended application VERY clearly.
You were a born pedantic, autistic IDIOT - Larkin.
When you die is the only time that will change.
...... Phil
Gosh Phil, sometimes you're right, and sometimes you're wrong, but you're always angry.
But I'm having fun while I'm alive. You should try it.
John
"John Larkin"
You were a born pedantic, autistic IDIOT - Larkin.
When you die is the only time that will change.
Hope for the sake of humanity it is real soon.
...... Phil
Well, if I was born that way, I can't help it, can I? So I may as well relax and go with it. And (just to be pedantic) I'm bipolar, not autistic.
Gotta hand it to you there!
It sure sounds like you need a break, to get away from things and relax a little.
Really, all that anger will kill you a lot faster than having fun will kill me. And if you intend to be angry for the rest of your life, you're sort of dead already.
John
Have something to add? Share your thoughts — no account required.
Ask the community — no account required