Peter Wieck Melrose Park, PA
- posted
5 years ago
Peter Wieck Melrose Park, PA
n-Hexane 110-54-3 20-30% Isopropyl Alcohol (Isopropanol) 67-63-0 10-20% 1,1 Difluoroethane 75-37-6 40-60%
n-Hexand and isopropyl alcohol are solvents normally used to remove grease and oil. n-Hexane is found in some foods, so the FDA has declared it to be food safe. It's also found in gasoline, which is not so safe. Little wonder it's listed as "fast drying" which should be "fast evaporating".
1,1 Difluoroethane is the propellant gas.It's basically an alcohol and solvent spray. No oxide remover means you get to rub off any oxide coating by hand. Also, no tarnish remover.
Cost $7 for 11 oz (400ml).
The other Jeff.
-- Jeff Liebermann jeffl@cruzio.com 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558
What a surprise, WD-40 makes yet another useless product.
No thanks, I'll stick with my De-Oxit, Fader Lube and Pro-Gold.
The other other Jeff.
-- "I am a river to my people." Jeff-1.0 WA6FWi http:foxsmercantile.com
I guess it takes a while for the leg to pull from Ranger to Melrose Park.
Peter Wieck Melrose Park, PA
Yank yank
-- "I am a river to my people." Jeff-1.0 WA6FWi http:foxsmercantile.com
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.