Infocus Projector intermittent failure

I have an Infocus LP400. It either works perfectly or fails to light the lamp. Unable to determine whether it is the day of the week or just it's mood that affects it. Have tried getting it going with data signals and checking the lamp is firmly seated. Any advice welcome thanks

Reply to
ninthtoe
Loading thread data ...

Send it to Infocus for repair if they will still touch it. Honestly, you are not going to be able to get any parts or service information out of them for the unit. It could be a bad lamp, bad ballast, bad main power supply, or a control signal problem.

Reply to
dkuhajda

Go to one of the sites that sell bulbs (projectordoctor.com) and see if the LP400 has bulbs listed. Some of these projectors had problems with bulbs blowing up and the bulbs are no longer avaialable. Ususally when you search for the model number and no bulb can be found, there is a reason.

Reply to
carneyke

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.