Cable connection help needed

G'Day, I am new here but am in need of help and this looked like just the place to get it - I hope ;

Reply to
Outback OZ
Loading thread data ...

Post them on a.b.s.e and post a link here.

Reply to
Homer J Simpson

Here are the pin outs and what is a.b.s.e. please?

Connections/pin outs/ins for the Data Translation FG board

The video input connector, J1, on the DT3157 is a SCSI-II 68-pin, subminiature 'D' shell connector that accepts the digital input signals using cables from Data Translation or cables that you design. Figure 7 illustrates the J1 connector pin orientation.

1 Ground 2 AD0 (+) (MSB) 3 AD1 (+) 4 AD2 (+) 5 AD3 (+) 6 AD4 (+) 7 AD5 (+) 8 AD6 (+) 9 AD7 (+) 10 AD8 (+) or BD0 (+) 11 AD9 (+) or BD1 (+) 12 Ground 13 AD10 (+) or BD2 (+) 14 AD11 (+) or BD3 (+) 15 AD12 (+) or BD4 (+) 16 AD13 (+) or BD5 (+) 17 DIG_IO0 18 DIG_IO2 19 AD14 (+) or BD6 (+) 20 AD15 (+) or BD7 (+) (LSB) 21 External Trigger In 22 Reserved 23 Reset Out (+) 24 Frame Enable Out (+) 25 Frame Enable In (+) 26 Line Enable In (+) 27 Line Enable Out (+) 28 Pixel Clock Out (+) 29 Pixel Clock In (+) 30 Expose (+) or SHUT(+) 31 DIG_IO4 32 DIG_IO5 33 DIG_IO6 34 Ground 35 Ground 36 AD0 ( ) (MSB) 37 AD1 ( ) 38 AD2 ( ) 39 AD3 ( ) 40 AD4 ( ) 41 AD5 ( ) 42 AD6 ( ) 43 AD7 ( ) 44 AD8 ( ) or BD0 45 AD9 ( ) or BD1 46 Ground 47 AD10 ( ) or BD2 48 AD11 ( ) or BD3 49 AD12 ( ) or BD4 50 AD13 ( ) or BD5 51 DIG_IO1 52 DIG_IO3 53 AD14 ( ) or BD6 54 AD15 ( ) or BD7 (LSB) 55 Ground 56 Reserved 57 Reset Out ( ) 58 Frame Enable Out ( ) 59 Frame Enable In ( ) 60 Line Enable In ( ) 61 Line Enable Out ( ) 62 Pixel Clock Out ( ) 63 Pixel Clock In ( ) 64 Expose ( ) or SHUT( ) 65 Ground 66 Ground 67 DIG_IO7 68 Ground If needed more data can be got at -
formatting link
Model number is DT3157 for search.

Connections/pin outs/ins for the Amtel camellia 2.5meg Camera

3=2E1 ''DATA AND SYNC'' CONNECTOR 50 points 3M connector. =A8 connector reference :HIROSE DX10A-50S. =A8 mating connector on cable side : HIROSE DX40-50P ; shell : HIROSE DX50-CV1.

Pin n=B0 Signal

1 PCK+ 2 PCK- 3 FEN+ 4 FEN- 5 COLOUR_O2+ (1) 6 COLOUR_O2-(1) 7 PDATA0+ 8 PDATA0- 9 PDATA2+ 10 PDATA2- 11 PDATA4+ 12 PDATA4- 13 PDATA6+ 14 PDATA6- 15 PDATA8+ 16 PDATA8- 17 PDATA10+ 18 PDATA10- 19 GROUND 20 GROUND 21 SHUTTER+ 22 SHUTTER- 23 COLOUR_I1+(1) 24 COLOUR_I1-(1) 25 NC 26 LEN+ 27 LEN- 28 COLOUR_O1+ ( 29 COLOUR_O1-(1) 30 GROUND 31 GROUND 32 PDATA1+ 33 PDATA1- 34 PDATA3+ 35 PDATA3- 36 PDATA5+ 37 PDATA5- 38 PDATA7+ 39 PDATA7- 40 PDATA9+ 41 PDATA9- 42 PDATA11+ 43 PDATA11- 44 NC 45 NC 46 TRIG_ITC+ 47 TRIG_ITC- 48 COLOUR_I2+(1) 49 COLOUR_I2-(1) 50 NC If needed more data can be got at -
formatting link

Cheers Tony

Reply to
Outback OZ

alt.binaries.schematics.electronic

Reply to
Homer J Simpson

I am new to Google forums - could you please be a bit more explicit? Tony

Reply to
Outback OZ

news:alt.binaries.schematics.electronic but it is not available to Google Groups users. Its only available to those using real usenet binaries servers.

--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
 Click to see the full signature
Reply to
Michael A. Terrell

You need a real newsserver and reader - Google won't do it. Or set up your web page on

formatting link
and post them there with links here.

Reply to
Homer J Simpson

The whole PDF files are availible on line at :-

formatting link
use DT3157 for search

Camera - User guide -

formatting link

Cheers - Tony

Reply to
Outback OZ

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.