I built a two tube radio about 20 years ago using 01A tubes. I put 5 regular 9 volt batteries in series to give 45 volts for the radio. Worked fine.
You know you can plug the 9 volt batteries + to - using the connectors on top?
Paul
Not a bad idea. They'd last ages too.
NT
They sure would. Their combined internal resistances would see to that; law of diminishing returns and all that. You really need to establish what the likely anode current will be. Amazing what they did with just one tube, though! Got to admire the resourcefulness that went into such designs.
-- This message may be freely reproduced without limit or charge only via the Usenet protocol. Reproduction in whole or part through other protocols, whether for profit or not, is conditional upon a charge of GBP10.00 per reproduction. Publication in this manner via non-Usenet protocols constitutes acceptance of this condition.
2-3mA. PP3s can kick out over 100mA.
Oh yes. Resourceful was the name of the game for a long time, now that silicon's cheap few care about efficiency or smart tricks.
NT
Maybe "graphene" seems slated as a pseudo-silicon replacement at that, too.
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.