аналог pcad'a под ОС linux

Привет Dmitriy!

27 Oct 04 20:16, Dmitriy Bogun писал All:

DB> Люди, существует ли сабж? Если да, то где можно найти?

The EAGLE Layout Editor is an easy to use, yet powerful tool for designing printed circuit boards (PCBs). The name EAGLE is an acronym, which stands for Easily Applicable Graphical Layout Editor.

The program consists of three main modules:

o Layout Editor o Schematic Editor o Autorouter

which are embedded in a single user interface. Therefore there is no need for converting netlists between schematics and layouts.

This is a Light Freeware Edition. It has the following limitations:

o The useable board area is limited to 100 x 80 mm (4 x 3.2 inches). o Only two signal layers can be used (Top and Bottom). o The schematic editor can only create one sheet. o Support is only available via email or through our forum (no fax or phone support). o Use is limited to non-profit applications or evaluation purposes.

Apart from these limitiations the EAGLE Light Edition can do anything the Professional Edition can do. You can even load, view and print drawings that exceed these limits!

WWW:

Всего наилучшего, [Team PCAD 2000] Алексей М. ... Аэроволны: ментол и эвкалипт для носа, мед и лимон для рота!

• Replying to a msg in main_carbon (основная карбонка)

Приветик, Alex.

30 Oct 04 16:54, you wrote to me: DB>> Люди, существует ли сабж? Если да, то где можно найти? AM> The EAGLE Layout Editor is an easy to use, yet powerful tool for AM> designing printed circuit boards (PCBs). The name EAGLE is an acronym, AM> which stands for Easily Applicable Graphical Layout Editor. -<< сгрызли лонгольеры >>-

Спасибо. [радостно уходит на freshmeat.net]

_[linux] [gcc/g++]_ _[open source]_

*np*: Альтависта (Другая точка зрени[Сплин] До связи, Dmitriy