-- Magnetic motor 1, the static magnetic field 1) Motor

-- Magnetic motor 1, the static magnetic field 1) Motor, Edison is a classic -- for the motor commutator. It gave birth to a commutator Early glory and pride of Health also has its challenges by the AC motor sad and helpless. (By his own mistakes, for To the trouble : Brush Powder, for to sparks and fire the ball, did not attain a high voltage DC not lock. ) 2) unipolar machine (single-pole, low voltage, still using brush. ) 2, rotating magnetic field 1) : AC induction motor stator magnetic spin (three-phase). 2) : AC synchronous motor rotor rotary magnetic field (three-phase), its magnetic field axis in a plane Like a (watches) targets the same rotation. 3, pulsating magnetic field : Single-phase induction motor start and external started. Not spin magnetic field, not transferred. Its intensity over time cyclical changes. 4, runner field : "no single-pole motor for devices to" exclude "other" distressed, Can achieve a high voltage transformer also carried DC to DC in Step EHV transmission epoch of the trouble Thrown into the eyes. DC is essentially internal, no ripple coefficient. Waveform very straight, pure and absolute DC; Lane from the outside of DC. Motor did not like the original internal actual exchange; Is the direct external Flow. The electrical field into trouble over the use of the motor performance of the structure also has advantages : simple, easy to manufacture. Capacity can be great, but also made it very convenient to DC transformer. -- AC transformers used alternating (a) a magnetic field For high and low pressure between the media; DC transformer alternating magnetic field is not without action, with rotation (a) switch -- Sub-runner field for the high and low voltage DC media. ) Magnetic cylinder in the aspect of its work (a cylinder). 5, turntable motor is a magnetic field : the birth of the motor 10 years ago. Magnetic its work Course for a round face, or face a ball. Obiter dictum : Cancel the commutator and then invented commutator considerable efforts, the impact, but the effect is more Good. "No single-pole motor commutator device" Yong Yu Beauty Motor Motor how? ! Switch can be dispensed with. BRIDGE into stumbling justice yesterday, For contradictory to the motor. In this gifted genius who Hongzhi, I will only change; Do the British to the beliefs of sorrows Still no change to the DC motor. Following clipboard. Brochures No change to the single-pole motor device This involves the application of a new generation and distribution equipment -- Motor. It is from Shell, Cover, Stator core and stator winding, rotor, rotor core composed. Currently, the widespread use of a DC motor, "with copper commutator universal motor", "Pick Silicon device and the DC component of the electrical flow generator, "" unipolar motor, "" permanent magnet brushless DC motor " And so on. "Copper commutator with the universal motor," and its commutator manufacturing process is very complicated, so Use, easy to EDM on the commutator, even ring of fire, because of the use of the commutator, the rated voltage of motor Not too high. "Silicon Devices AC motor with a DC generator," the AC motor -- that silicon Rectifier, the voltage waveform is not straight, there is a certain element of the pulse. To reverse voltage and rated by the Silicon Devices Current restrictions make it impossible to form very high DC power generators. "Unipolar motor" from the stator magnetic yoke, a circular pole, Coil and rotor, brush and other groups %. This brush will often switch to motor liquid metal collector system, which is generally available as a liquid metal collector system Sodium and potassium alloy of mercury, mercury is toxic, liquid metal sodium-potassium alloy, very lively and chemical properties when exposed to air , With a risk of explosion. "Permanent magnet brushless DC motor," and the electronic components, with the result that not much electrical power, and more The joints and components, bringing inconvenience to the maintenance costs are high. The purpose of this is to avoid the application of a new technology of these existing deficiencies, and provide a "non - Device for single-pole motor, "and did not use the motor for the inconvenience to the maintenance of installations, but also to achieve a high Pressure, the voltage waveform directly create simple, low cost and high efficiency. The purpose of this utility model can be achieved through the following measures : Shell, Cover, stator core, Stator windings, Rotors, composed of the rotor device for no single pole motor, the rotor from the preceding (1), middle magnet (4), after paragraph (7) of which of the magnet (4), a polar ends of the show, and To the middle magnet (4) a leader in a magnetic Cover (12) axial hole and the other end in Rotors (9) round Hole (2); Shell (11) is a magnetic part (24) and non-magnetic parts (23) phase spacing was Moments Profile crossed 20% stator core (10) in the shell (11) magnetic part of the medial (24) ; In the stator core (10) and Shell (11) part of the non-magnetic material (23) the medial surface of a separate groove (22), (21). Rotor magnet in the middle (4) Magnet, Ring can be posed by Coil Winding thread arising from the electro-magnetic field. The above-mentioned Rotor shaft links can call it is the middle of the magnetic pieces. Shaft in the preceding paragraph (1) side of the magnetic Cover (12) Section magnetic materials for the other side of the Cover (8) is made from non-magnetic materials. Stator windings (6) is the introduction of two Winding (6), (6a), and the stator windings (6), (6a) thread, embedded in the side of some non-magnetic material (23), opening the groove (21), embedded in the side of the stator core (10) opened the slot (22); Adopted a set WINDING (6), only the stator windings (6), leads to one or more intermediate tap, the stator windings (6) Turns for at least one turn of thread. Shaft in the preceding paragraph (1) the open end of a cylindrical convex breaks magnets (4) The open end of a cylindrical convex enable embedded in the hole; In Rotors (9), the center opened a site linked to the ends Hole (2), the middle rotor magnets (4), and not after the end of the hole (7) hole in the side load (2). And fixed. The figure illustrates the following : Figure 1 : The utility model matrix. Figure 2 : Diagram magnet middle of the shaft. Figure 3 : rotor, rotor core matrix. Figure 4 : shell matrix. Figure 5 : shell and the stator core post-show plans. Figure 6 : Diagram the motor wiring. Figure 7, the electrical launch plans. Figure 8 : Diagram electrical magnetic fields. Figure 9 : Generator work state diagram. Figure 10 : electric motor in the state diagram. Figure 11 : Name two stator windings. Map gives a practical implementation of the new cases. The following is attached map of the utility model for further details : -- Without the application of a new device for the single pole motor, as shown in figure 1, it is caused by shell (11), the stator core (10), Rotors (9), Cover (8), magnetic Cover (12), bearing cap (13), the stator windings (6), Blade (3), rings (5), which includes the shaft, the shaft is characterized by : Points (1), middle magnet (4), after paragraph (7) composition; Rotor magnet in the middle (4) by the end of the magnetic equipment Cover the magnetic material (12) axial hole and the other end in Rotors (9) of the hole (2). Middle Magnets (4) Magnet, a polar ends of the show (shown in figure 2); From the preceding paragraph (1), middle magnet (4), after paragraph (7) of the shaft formed in the shaft portion (1) the open end of a cylindrical convex breaks magnetic CARICOM (4) the open end of a cylindrical convex embedded make holes in Rotors (9), the center is open at both ends The same hole (2), the middle rotor magnets (4), and not after the end of the hole (7) hole in the side load (2), and fixed, as shown in figure 3. Middle magnet (4) may be winding line of packet ring excitation Magnetization of the magnetic field generated by the coil from the electromagnetic body, rotor shaft can call it links only to the middle magnet. Shell (11) by the magnetic part (24) and non-magnetic parts (23) phase partitioning, and combining overlapping tooth was moments % (As shown in figure 4), Shell (11) magnetic part (24) played a magnetic effect is composed of a magnetic circuit , Shell (11) part of the non-magnetic material (23), the magnetic field plays a role in reducing beam armature reaction. Shaft Portion (1) side of the magnetic Cover (12) for magnetic materials, the other side of the Cover (8) by a non-magnetic material Made, stator core (10) is a fan-like shape silicon steel sheet from stack system, and fixed the casing (11) of the medial magnetic materials Some material (24); In the stator core (10) and Shell (11) part of the non-magnetic material (23) with the side , Each opened a groove (22), (21) (shown in Figure 5), the stator windings (6), thread embedded in the side of non-magnetic Some material (23) opened the medial surface of the groove (21), embedded in the other side of the stator core (10) opened the medial surface of the groove (22), embedded groove (22) have the potential to the starting line Hemming, embedded (21) only serves to link the line Hemming The power supply situation, that is only starting to groove (22), while the thread links up the potential role. When the stator windings (6) the thread serial wiring method, its wiring As shown in figure 6, Figure 6, S stator core (10) was Is the polarity, arrows indicate the stator windings (6) of the thread within the current direction of the relative movement in the direction of winding V said. Stator windings (6) the introduction of two windings (6), (6a) (shown in figure 7), the stator windings (6), (6a) Thread embedded in the side of the groove (21), embedded in the other side of groove (22); Equipped with two stator windings (6), (6a) with the following : First, in three different provisions of the electrical voltage value, given the same speed, in With a voltage value, given three different speed, and the third is when two sets of stator windings (6), (6a), which DC motor connected to one power supply for operation, with another winding in the rotor magnetic field rotation policy, Potential; If the two sets of stator windings (6) (6a) turns different, the internal situation -- not the same, and this structure Became DC transformer. Stator windings (6) is a winding, only the stator windings (6), or leads to a Intermediate tap the same, such a structure could pose a DC transformer. Stator windings (6) with a winding, its Line package turns at least one turn. When the stator windings (6) Turn one of the thread turns, it can save some embedded groove (21), the only play the role of the Alliance line Hemming (because of the potential side does not produce or connecting), the moment, If the line between the packages using the parallel connection, then stator windings (6) as Cage on the shape of embedded groove (22), the thread became Cage on the side of the cage, the continuous parallel lines on the package into the terminal ends of the Central cage. The utility model of the shell structure (11) part of the magnetic material science (24), the stator core (10), Rotors (9), magnetic Cover (12), have played the role of magnetic and magnetic pieces in the middle shaft (4) A polar ends of the shows, which are a form of motor internal magnetic circuit breaks magnets (4) -- Rotor Core (9) -- stator core gap -- (10) -- Shell (11) magnetic part (24) -- Magnetic Cover (12) -- middle magnet (4) (shown in Figure 8). Rotors can be seen from Figure 8 (9) in the stator core (10) showed the Unipolar cavity, which is due to magnetic Cover (12) middle magnets used in magnetic rotor and (4) the results. Principle, Figure

8 from the electrical field within the matrix can be seen Rotors (9) stator core (10) were endovascular Unipolar now, so when Rotors (9) rotation, in the stator core (10) to a cavity Unipolar The rotating magnetic field embedded in the stator core (10), opening the groove (22) of the winding line of packet will be cutting edge magnetic lines Sensors have potential in the stator core (10) and Rotors (9) gap between the shape of the magnetic field lines Radiation shape its direction from both Rotors (9) at the stator core (10), as shown in figure 8. 1, the principles of the application of a new generation
From left to right around the motor shaft, the rotor driven by an

anti-clockwise rotation of the original motives, Embedding stator core (10), opening the groove (22) of the stator windings (6), son of the rotor along the lines of Hemming relatively smooth when The direction of rotation to cut magnetic needle. To the rotor shaft stator core is embedded in the top (10), opening the groove (22) The line Hemming example, in Figure 9 : Hemming line perpendicular to the direction of movement outside the paper, from the direction of magnetic field lines Under progressive, right-hand rule : thread Side judge the potential and current direction "from right to left" ; Can be judged the same way, each embedded groove (22) have both the direction of the border line packages "from right to left" -- Potential and current. Some non-magnetic materials embedded (23), opening the groove (21), the thread while not cutting magnetic field lines. (This is due to constitute a magnetic field lines are located in the magnetic loop inside the non-magnetic materials are divided (23) within a few Between nuclear magnetic line), do not have sensors potential. Thus, these have not put the potential embedded in the trough line Hemming (22), while the thread linking the potential, so that each line would have a certain numerical Hemming DC Pressure; According to the different ways of wiring, the thread may link between the serial, parallel or series first part, then the Parallel , The line will link DC voltage generated within the package. The lines used to establish the connection between the packet mode, bypassing Connection Group plans can be found in Figure 6. From the end of the first link between the two reached, will be given a certain value of DC voltage. It can be seen that this motor is not used for the device. 2, the utility model as the principle motor running When the motor's stator windings (6) DC power supply connected, in the stator windings (6), thread each side They have passed DC. Some non-magnetic materials embedded (23), opening the groove (21), while the thread, because Without magnetic field around (because gathered in the magnetic field caused the magnetic circuit Lane), which occurred with each other for the rotor magnetic field ; Embedding stator core (10), opening the groove (22) at the magnetic field lines Hemming, the rotor magnetic field phase and it -- Have a role in the interaction. Figure 20 below to above are embedded in the shaft groove (22) of the stator windings (6) the line Hemming example, the current direction of the line Hemming from left to right, upward direction of the magnetic field lines, Left-hand can determine, the line Hemming paper by the vertical direction to the outside; Similarly, we can see the shaft is below : Embedding groove (22) by a thread while the vertical direction of the paper geared Lane, each embedded groove (22) of the line Hemming Make subject to the direction and stator windings (6) to the direction of rotation. From the left-right axis ship set WINDING (6) : Inquiries by the direction it is rotating clockwise direction; According to the law, we can see action and counteraction, Make the direction of the rotor by an anti-clockwise rotation of the rotor direction, the stator windings (6) was solid stator , Not turning it clockwise rotation will be opened to the rotor, so that became a DC motor. Shown in figure 11 in the stator windings : (6) were the first two terminal P, Q, stator windings (6a) Ends at the first K, H, P and K for the two windings end of the same name. In manufacturing, in accordance with the same two sets of windings design speed (6), (6a) were rated voltage U1 and U2. In the use of a separate motor stator windings (6), rated voltage used in the motor alone will U1; WINDING (6a), will be used when U2; rated voltage motor stator windings of the two (6), (6a) in a Series Date (Q and P and K linked or connected H), the use of rated voltage (U1+U2), and can be in three different With a speed of under voltage. At the time of manufacture, stator windings (6), (6a) turns taking the same value; When the two stator Winding (6), (6a) Series (P K and H connected or associated with Q), it would be a turn numerical. When the motor alone Independence use stator windings (6), used alone or stator windings (6a), or to compare the two sets of stator windings (6), (6a) Series Even when used together, then at the same voltage, because of the three different winding turns, each packet was turn lane Voltage is not the same, according to the formula : "disk e =BLV", we can see that there will be three motor speed. This Similarly, it enables the two sets of stator windings (6), (6a) of the motor, available in three different voltage with a Speed. 3, the utility model as the principle DC transformer Motors and generators from the above principle when the stator windings can be drawn : (6) links Ruzhi Chokes, embedded groove (22) on the inside of Hemming interaction with the rotor magnetic field, will enable rotor rotation; In turn, turn Son turning Unipolar also rotating magnetic field, Unipolar embedded magnetic fields cutting groove (22), while the thread, the thread while Have potential. For the introduction of two windings (6), (6a) of the motor, and when the motor windings of a (6) then DC electrical power as empty running, the stator windings (6) Current driven rotor rotation; And the rotor Unipolar cutting the stator windings magnetic fields (6a) in the stator windings (6a), which is embedded in groove (22), the line Hemming Producing potential; Stator windings (6) and the stator windings (6a), the potential size of the circle by their respective total Series Few decisions. This change in the stator windings at the time of manufacture (6a) turn results in the stator windings (6a) obtained With the potential voltage, which aims to achieve a DC transformers. Only a stator winding winding and winding one or more intermediate tap on the leads, can be put into practice DC current transformers. The principle and we have two sets of windings (6) (6a), the DC motor lock the same principle. The practical advantages : no change to a new type of device to achieve high output, the voltage waveform Direct, simple structure, and save materials, high efficiency, low cost and easy maintenance. The two coaxial connecting utility model, No level of DC voltage regulation. [19] The People's Republic of China Patent Office [12] The application of a new patent application brochure [21] Application No.

88205221.7 [43] Notice Day April 19, 1989 [22] 88.5.6 application. [71] days Wang Wei applicants Address agricultural mechanization school in Xinxiang City of Henan Province Wong Tin-chi joint applicants [72] Wang Wei Wong Tin-chi designer [54] no name for the application of a new single-pole motor device [57] Summary This involves the application of a new-types of power generation and distribution equipment for device -- no single pole motor, it By Shell, Cover, stator core, Rotors, stator winding, rotor and other components, rotor magnet to the middle or Magnet, a polar ends of the show, the shell is part of magnetic and non-magnetic parts from the interval, was sawing Also combines diplomatic profile, - side of the magnetic Cover to Cover, Cover shaft in the middle of magnets and magnetic. Core cavity in the rotor on the stator core has to Unipolar. The practical advantages of the new maintenance is not used : For the device will be issued directly to the voltage waveform, the manufacturing process is simple and low cost, high efficiency. Book claims 1, no change to a single-pole motor installed by Shell, Cover, stator core and stator around Group; Rotors, rotor, its characteristic : But a shaft from the preceding (1), middle magnet (4), after paragraph (7), of which pieces of magnetic (4), a polar ends of the show; B, the middle rotor magnets (4) installed by the end of the magnetic properties of magnetic materials produced Cover (12) Axial hole and the other end in Rotors (9) of the hole (2); C, Shell (11) from the magnetic part (24) and non-magnetic parts (23) phase partitioning, Cross-profile moments was the formation, stator core (10) in the shell (11) magnetic part of the medial (24) ; D, in the stator core (10) and Shell (11) part of the non-magnetic material (23) in the anterior surface A separate groove (22), (21). 2, as described in the request without rights to the device for single-pole motor, the rotor is characterized Middle magnetic pieces (4) magnet. 3, as described in the request without rights to the device for single-pole motor, the rotor is characterized Middle magnet (4) is the Ring Coil Winding packet from the electro-magnetic field. 4, according to claim 1 or 2 or 3, no change to the device described in the single-pole motor, characterized in Links to the rotor shaft is a bat, middle magnet. 5, as described in the request without rights to the device for single-pole motor, characterized by lies, in turn Shaft portion (1) side of the magnetic Cover (12) for magnetic materials, the other side of the Cover (8) by the non-magnetic material Liu made. 6, as described in the request without rights to the device for single-pole motor, its characteristics is that the stator Winding (6) is the introduction of two windings (6), (6a), and the stator windings (6), (6a), while embedded thread Core elements stereotyping (10), opening the groove (22), embedded in the side of some non-magnetic material (23), opening the groove (21) Inside. 7, as described in the request without rights to the device for single-pole motor, its characteristics is that the stator Winding (6) is a winding and the stator windings (6), leads to one or more intermediate tap, the stator windings (6) the thread at least turns a circle. 8, no basis for the claim referred to the installation of two single-pole motor, its characteristics is that the shaft Portion (1) the open end of a cylindrical convex breaks magnets (4) the open end of a cylindrical convex make inlay Into the hole, Rotors (9) linked to the ends of the center opened a hole (2), the middle rotor magnet (4), and not after the end of the hole (7) hole in the side load (2), and fixed. Key words : cutting potential runner field magnetic shielding single pole DC transformer without reversing device Generalized Motor "Thermo-electrical" non-magnetic motor "Chemical-electrical" that battery "Savings-Motor" Capacitor "General Motors" that the mechanical energy into electrical energy, which the daily referred to as the Motor "Burning motor" that fuel cells, hydrogen combustion "Electrical light" Solar Cell

formatting link

Reply to
a012210
Loading thread data ...

Wow - and your point is???

J.

Reply to
Johnny Boy

Looks like someone copied one of those search engine spaming sites that uses keyword stuffing.

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----

formatting link
The #1 Newsgroup Service in the World! 120,000+ Newsgroups

----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Reply to
default

looked like partial text of a patent to me.

--
Bye.
   Jasen
 Click to see the full signature
Reply to
jasen

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.