damaged components (gfx card)

I have a PNY geforce 4 ti4200 64Meg graphics card which has sustained some damage. The damage is not very extensive and I was thinking to repair it myself. I'm proficient at pcb repair...whoever, i'm not good at finding proper components w/out a parts list.

I took some close up photos of both sides of the pcb where damage has been. They can be seen here....

formatting link

-------------------

q905 and c1267 are smoked. c1371 is slightly mushroomed on top and should be changed too.

c1371 and c1267 are identical: Barrel caps 6.3V, 1000microFarad, 105 degrees C,...the vendor is apparently Canicon.

q905 has the markings.....

230 (beside this number is a small "on" w/ a circle around it.) D30 N02

not sure how to cross reference these numbers. I'm assuming that one would be the date code.

-------------------

their is also one trace that is damaged(open). This i could easily repair.

I just need some help in finding the transistor(s) and the cap.

If someone could please help me on this subject or nudge me in the right direction where to look, this would be appreciated.

thanks you,

--
PhendR
Reply to
PhendR
Loading thread data ...

Try this page for the transistor data..

formatting link

The capacitors may need to be Low ESR types, otherwise you have all the data you need (6.3V 1000uF)

It also looks like there is a mark/damage under the coil L801?

been.

be

degrees

Reply to
CWatters

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.