Anyone would get rid off electronics parts ?

Hello

Anybody do have any electronics parts, IC's, transistors, capacitors, resistances, etc... that you don't need anymore that you want to get rid off them and that you would give or sell for very low prices ?

It's to do experiments and try projects.

If so, send me an email.

Thank you

Gaetan (Canada)

Reply to
Gaetan Mailloux
Loading thread data ...

You can get a really good supply of parts just from scrap equipment. SOme of it will be useless unless you have their specific need, and some esoteric stuff that you want won't be available, but you can really build up a good assortment of common parts this way.

I went and bought parts for the first few projects I tried to build when I was a kid, but mere months later I was buying computer boards (surplus from mainframe computers) for the transistors and other parts. Ironically, the first thing I actually got to work was put together from such parts, rather than the things I built from parts I bought fresh from the store. Those boards also supplied a good set of resistors.

I passed a tv set the other day, the back cover was already off. If the board had come out easily (or if the weather had been nicer so I felt like fussing over it) I would have taken it. Because I needed a horizontal output transistor and had hopes this one's would have been fine at least for a test session. It would have been a good source of resistors (if I actually needed yet more resistors), bypass capacitors and electrolytic capacitors (so long as you test them before reusing). Lots of transistors, and for a lot of things one can make do with the same general type of transistor. Though I have far more than I'd actually ever use, other times I've been known to pull the tuner modules out, because they are standalone modules and either easy to figure out the pinout, or the pinout is actually marked.

I did grab a module that came off easily, and it turned out to have a "super cap" that supplies voltage to some RAM to hold settings. I needed some for something a few months ago, and couldn't find where I'd put my collection (all out of tv sets and VCRs), so I was glad to get this one.

VCRs are plentiful, and likewise have a lot of common parts. Tuner modules and rf modulators, if you need those. Various motors and gears. I've pulled lots of small switches and LEDs out of these.

Old equipment can be a source of power transformers, though sometimes you have to live with somewhat odd AC output voltages. Clock radios, for instance, have pretty tiny transformers, but transformers bought new can be so expensive that they cost more than the rest of the project so you won't put in a power supply. If you can pull a suitable trnasformer out of something, you are more likely to toss in a dedicated supply, which can be convenient at times. More recent items have switching supplies, that usually are more suitable for hobby work than the readily available computer supplies, because they are designed for lower current capacities. I needed an AC adaptor for a Mac Powerbook I got at a garage sale, and found a suitable 24V switching supply in an inkjet printer, which are also readily available in the garbage.

Dot matrix printers, which seem to be fading too (they used to be really common as garbage and at garage sales, but I see less of them these days), have a lot of power transistors, nothing exotic but fine for a lot of switching work. Again, they also have some heavier stepping motors.

If you work with radio, then old radios can be a source. Especially for variable capacitors and timmer capacitors.

Cordless phones will offer up various radio components, including complete FM receivers that could be reworked. Older cellphones, the clunky kind, have lots of parts, though they seem to have fairly disappeared by now. The more recent ones are too compact to supply many parts.

If you needed solar cells, then you'd be looking for solar powered calculators (I don't know how reusable the cells in those are) or the now relatively common (but not yet in garbage) solar powered LED garden lights.

Computer boards, home computers that is, can supply various parts, though these days there is enough integration that many of the parts can't be used for other things. If you need crystals and crystal oscillators, they are a good source. Floppy drives can supply various motors, and don't forget the really strong magnets inside hard drives.

I have found all the computer power supplies I could ever need, and I actually have stripped them of parts and used them as project boxes, covering the "front panel" with a piece of circuit board (which is easy to work). Indeed, I've built a number of power supplies in these, supplies more suitable for low current needs than the original switching supplies, using the case and then parts (including transformers) I've pulled out of scrap equipment.

If you can't find this stuff waiting for the garbage trucks, a lot of it is cheap at garage sales and rummage sales. The moreso if it doesn't work, and few will be in competition for it.

You will have to buy some parts, but you can do a lot with the parts you can pull of scrap electronics.

If none of this helps, you might find cheap parts at amateur radio club fleamarkets. Not just parts, but scrap electronics and surplus boards. The Radio Amateurs of Canada keep a list at their website at

formatting link
and I do know there is at least one in Ottawa, on September 1st.

Michael

Reply to
Michael Black

here here!!

excellent! the true recycling of these parts is one of the best ways to reduce the garbage stream.

or, if it has already been built before by someone, dont rebuild it again?

Reply to
<hapticz

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.