XmdStub fails when connecting via JTAG.

Hi, I would like to know if anyone has received this message when he tries to start XMD.

This message appears some times and I have to close Xmd Windows and start again so the message doesn't appear. I use Xilinx Parallel IV Cable and version 8.2 for EDK.

Thanks.

PowerPC405(1) : ppc405_0 Address Map for Processor ppc405_0 (0x00000000-0x01ffffff) opb_ddr_0 plb->plb2opb->opb (0x41200000-0x4120ffff) opb_intc_0 plb->plb2opb->opb (0x41400000-0x4140ffff) opb_mdm_0 plb->plb2opb->opb (0x41c00000-0x41c0ffff) opb_timer_1 plb->plb2opb->opb (0xfffe0000-0xffffffff) plb_bram_if_cntlr_1 plb

PowerPC405(2) : ppc405_1 Address Map for Processor ppc405_1

Connecting to cable (Parallel Port - LPT1). Checking cable driver. Driver windrvr6.sys version = 8.1.1.0. LPT base address = 0378h. ECP base address = 0778h. ECP hardware is detected. Cable connection established. Connecting to cable (Parallel Port - LPT1) in ECP mode. Checking cable driver. Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.

-------------------------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------------------------- DeviceIoControl LPT_READ_BUFFER Failed. Loopback test failed. Sent character = 7F, Received character = FF. The hardware may be malfunctioning or the BIOS setting for the Parallel port is not set to ECP mode. Cable connection failed.

-------------------------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------------------------- Connecting to cable (Parallel Port - LPT1). Checking cable driver. Driver windrvr6.sys version = 8.1.1.0. LPT base address = 0378h. ECP base address = 0778h. Cable connection established. ECP port test failed. Using download cable in compatibility mode. INFO:MDT - Assumption: Selected Device 1 for debugging.

JTAG chain configuration

-------------------------------------------------- Device ID Code IR Length Part Name 1 0127e093 14 XC2VP30

XMD: Connected to PowerPC target. Processor Version No : 0x200108a0 Address mapping for accessing special PowerPC features from XMD/GDB: I-Cache (Data) : Disabled I-Cache (Tag) : Disabled D-Cache (Data) : Disabled D-Cache (Tag) : Disabled ISOCM : Disabled TLB : Disabled DCR : Disabled

Connected to "ppc" target. id = 0 Starting GDB server for "ppc" target (id = 0) at TCP port no 1234 XMD%

Reply to
Pablo
Loading thread data ...

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.