>
>
>
>
> > Ed McGettigan wrote:
>
> > > Did you buy the EK-V6-ML605-G (base) or the DK-V6-EMBD-G-XP1 (embedde=
d
> > processing) kit?
>
> > Embedded processing kit.
>
> > > Most of the reference designs can be found at:
> > >
formatting link
>
> > That's where I had been looking.
> > I can't find the video demo that's referenced
> > in the printed documentation though...
>
> > The printed docs talk about ISE 12.1, so I assumed
> > the video demo would at least be in the 12.1 archive,
> > but it's not there.
>
> > The "Hardware and Demo Setup Guide" points me
> > towww.xilinx.com/v6embkitformore information,
> > but that seems to be a dead link.
>
> > Thanks
>
> > Pete
>
> Ok, so the CF card image matches the kit that you bought, but maybe
> the printed documentation was wrong.
>
> There are several broken links with the xilinx.com site wide update
> last week. =A0I will try to get this one fixed. =A0In the mean while you
> can use this link:
formatting link
BD-G.htm
> Ed McGettigan
> --
> Xilinx Inc.- Hide quoted text -
>
> - Show quoted text -
The web team fixed the broken link that is used in all of board documentation:
formatting link
will now redirect to the correct location.
Ed McGettigan
-- Xilinx Inc.