PLB/OPB Bus Access from ISE

Is there an easy way to access the PLB or OPB buses from XIlinx ISE without going through the PowerPC and EDK? I am using the XUP Virtex II Pro Development Board and want to read/write from DDR RAM in ISE rather then EDK for speed reasons. So I need to access the PLB/OPB buses from ISE which are connected to the DDR RAM.

Thanks

Ashwin

Reply to
akcooper8
Loading thread data ...

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.