Pengadaan Pelatihan/Training PT MMS 2015

Training Syllabus:

INDUSTRIAL TOXICOLOGY & HYGIENE MONIRORING

(BASIC PRINCIPLES IN OCCUPATIONAL HYGIENE)

Almost Running tanggal 23 - 27 Mar 2015

TRAINING DESCRIPTION:

An introductory course outlining the broad principles of Occupational Hygie ne as the basis for anticipation, recognition, evaluation and control of ha zards that can be encountered in the workplace

TRAINING AIMS:

a. To provide a practical understanding of occupational hygiene for peo ple who need to manage or advise on workplace health issues in their employ ment.

b. To provide a foundation for students who wish to undertake more in-d epth study in individual occupational hygiene subjects.

c. To inform and enthuse students about the field of occupational hygie ne

TRAINING OUTCOMES :

On successful completion of this module the student should have a basic und erstanding of:

a. The value of occupational hygiene and the role of the occupational h ygienist

b. The range of health hazards encountered in the workplace.

c. Hazard recognition techniques

d. Sources and potential routes of occupational exposure

e. Exposure assessment and the measurement processes involved

f. Methods of controlling exposure

WHO SHOULD ATTEND THIS TRAINING?:

Health and safety professionals

Occupational health specialists (including physicians and nurses). speciali sts in subjects such as acoustics, ergonomics, human factors, occupational psychology, work, organisation, biosafety, acoustics, engineering, or analy tical chemistry who want a broader appreciation of how their role interface s with other professions over health issues in the workplace

TRAINING MATERIAL OUTLINE:

Day 1:

  1. Introduction

Definition of Occupational Hygiene History and background of the development of Occupational Hygiene The importance of Occupational Hygiene today

  1. Human physiology

An introduction to the physiology of the human body and how it can be affected by occupational exposure to chemical and physical agents.

  1. Fundamentals of Toxicology

Basic concepts in toxicology including hazard, dose, routes of entry/ absorption, metabolism, toxicity testing.

Material Safety Data Sheets as sources of hazard information.

  1. Examples of Hazardous Substances/Processes

Illustration of where common hazardous substance/processes occur and their effects on the body.

Day 2:

  1. Assessment of Health Risks

Basic principles of risk assessments, definitions of hazard and risk with brief mention of expert systems and control banding

  1. Measurement of airborne contaminants

An introduction to the measurement of dusts, gases and vapours, including physical states of matter, types of sampling and analytical metho ds

  1. Hygiene Standards and Occupational Exposure Limits

Overview of the basic concepts including Occupational Exposure Limits, units of measurement, time-weighting, simple calculations/algebra.

Standard setting.

  1. Biological monitoring and Health Surveillance

a. An introduction to the role of Biological Monitoring and Health Surv eillance.

Day 3:

  1. General Approaches to the Control of Risk to health

Outline of the main elements within the hierarchy of control.

  1. Ventilation

a. Basic principles of General Ventilation and Local Exhaust Ventilatio n.

  1. Asbestos

a. Overview of the hazards associated with asbestos and its

control in the workplace.

  1. Biological Hazards

a. Overview of the main biological hazards and their effects on humans.

Day 4:

  1. Noise

Overview of the physics of sound and units of measurement, basic physiology of the ear and the effects of noise

  1. Vibration

Overview of the physics of vibration and its health effects on the whole body and locally.

  1. Thermal Environment

Introduction to human responses to the thermal environment and ways to evaluate it.

  1. Lighting and Non Ionizing Radiation

Introduction to the electromagnetic spectrum and the various bands of non-ionizing radiation, focusing on visible light.

Effects and assessment of lighting in the workplace.

  1. Ionizing Radiation

Introduction to health effects of ionizing radiation, exposure assessment and control techniques and the specialist roles of

those who deal with it.

  1. Introduction to Ergonomics

Introduction to musculoskeletal injuries, ergonomics and the role of the ergonomist.

Day 5:

  1. Display Screen Equipment

Overview of the hazards associated with the use of display Screen Equipment and how they should be managed.

  1. Human Factors

The importance of human factors and their role in assessment and control of risks.

Behaviour and culture.

  1. Occupational Hygiene Program

Introduction to Occupational Hygiene Program implementation in industry

  1. Stress Management

Introduction to stress and its management in the workplace.

VENUE : Bandung

TRAINING DURATION : 5 days

JADWAL TRAINING LAINNYA :

06 - 10 Apr 2015 25 - 29 May 2015 22 - 26 Jun 2015 29 Jun - 03 Jul 2015 24 - 28 Aug 2015 28 Sep - 02 Oct 2015 05 - 09 Oct 2015 23 - 27 Nov 2015 30 Nov - 04 Dec 2015

INVESTMENT PRICE/PERSON :

Rp. 9.250.000/person (full fare) or Rp. 8.750.000/person (if there are 3 persons or more from the same company)

---ooOOOoo---

Training Syllabus:

ADVANCED PID CONTROLLER

Bandung, 6 - 9 April 2015

TRAINING DESCRIPTION:

Covers the principle of advance industrial process control. Also provides the usually found advanced PID configuration in industrial systems. Method s for advanced PID controller configuration and tuning are also discussed.

TRAINING OBJECTIVE:

You will be able to :

a. Understand the concept of advanced process control

b. Understand the concept of advanced PID controller

c. Identify the requirement for open loop and closed loop stability

d. Understand the concept of advanced PID controller

e. Use advanced PID controller tuning

f. Know the implementation of advanced PID controller and advanced tu ning

TRAINING MATERIAL OUTLINE:

  1. Review to Process Control

  1. Advanced Types of PID Controller

  2. Performance of Control Systems

  1. Cascade control

  2. Ratio control

  1. Split-range control

  2. Signal select control

  1. Feedforward control

  2. Anti-windup control

  1. Advanced PID Tuning

  2. PID Auto-tuning

  1. Optimal PID tuning

CLASSROOM/ DEMONSTRATION/ LABORATORY EXERCISE:

a. Computer Facilities with Personal Computer Intel Pentium III and 4

b. Practical work using PLC (Yokogawa, OMRON or Schneider)

c. Simulation using Expertune or MATLAB Software

d. Process Simulator

PREREQUISITE : Have Knowledge on Process Control

---ooOOOoo---

Adapun informasi training lain yang akan kami selenggarakan :

Bulan Maret

Budgeting ang Project Cost Control, tanggal 18 - 20 Maret 2015 di Bandung - RUNNING Petroleum Engineering For Non Petroleum Engineer RUNNING tanggal 18 - 21 Ma ret 2015 di Bandung Internal quality audit ISO 9001:2008 Almost RUNNING tanggal 19 - 20 Maret di Jakarta Manajement Export Import Almost RUNNING tanggal 19 - 20 Maret di Jakarta Effective Public Relations Skill, tanggal 23 - 25 Maret 2015 di Bandung - R UNNING Penerapan PTK 007 Revisi 2 dan TKDN sebagai Pedoman Pengadaan Barang & Jasa Industri Hulu Migas, tanggal 23 - 25 Maret 2015 di Yogyakarta - Almost RU NNING Project Management, tanggal 23 - 25 Maret 2015 di Yogyakarta - RUNNING Maintenance Management (PDM, PM, & Pro-Active Maintenance), tanggal 23 - 26 Maret di Yogyakarta - Almost RUNNING Marine and Terminal Operation, tanggal 23 - 26 Maret 2015 di Yogyakarta - A lmost RUNNING Teknisi K3 Listrik, tanggal 23 - 26 Maret 2015 di Bandung INDUSTRIAL TOXICOLOGY & HYGIENE MONIRORING Almost Running tanggal 23 - 27 M aret 2015 di Bandung Petugas K3 Kimia tanggal 23 - 28 Maret 2015 di Bandung Asset Management tanggal 25 - 27 Maret 2015 di Bandung - Almost RUNNING IT AUDIT PRACTICES Almost Running tanggal 25 - 27 Maret 2015 di Bandung PERFORMANCE MANAGEMENT tanggal 25 - 27 Maret 2015 di Bandung Contract Management tanggal 31 Maret - 2 April 2015 di Bandung - RUNNING

Bulan April

CCTV tanggal 6 - 8 April 2015 di Bandung FINANCE FOR NON FINANCE FOR OIL & GAS INDUSTRY tanggal 6 - 8 April 2015 di Bandung Advanced PID Controller, tanggal 6 - 9 April 2015 di Bandung - RUNNING Shipping Management, tanggal 6 - 9 April di Yogyakarta - RUNNING Bahagia dan Produktif Saat Purnabakti tanggal 6 - 10 April 2015 di Bandung Problem Solving and Decision making Almost Running tanggal 6 - 10 April 201

5 di Bandung ELECTRICAL POWER SYSTEM ANALYSIS USING SOFTWARE APPLICATION Almost RUNNING tanggal 6 - 10 April 2015 di Bandung RELIABILITY CENTERED MAINTENANCE tanggal 8 - 10 April 2015 di Bandung Project Management, tanggal 13 -17 April 2015 di Bandung Almost RUNNING Ahli K3 Listrik (Sertifikasi), tanggal 13 - 24 April 2015 di Bandung - Almo st RUNNING Contract Management, Strategy & Administration for Oil & Gas Company, tangg al 20 - 22 April di Yogyakarta - Almost RUNNING BASIC ELECTRICAL FOR NON ELECTRICIAN tanggal 20 - 23 April 2015 di Bandung OLE FOR PROCESS CONTROL (OPC) & DISTRIBUTED COMPONENT OBJECT MODEL (DCOM) t anggal 20 - 23 April 2015 di Bandung Petugas K3 Pemantauan Lingkungan Kerja tanggal 20 - 26 April 2015 di Bandun g PROGRAMMABLE LOGIC CONTROLLER tanggal 21 - 24 April 2015 di Bandung Alignment, Levelling and Controlling tanggal 27 - 29 April 2015 di Bandung Power Electrical Installation System tanggal 27 - 30 April 2015 di Bandung

Bulan Mei

  1. ELECTRICAL POWER SYSTEM ANALYSIS USING SOFTWARE APPLICATION Almost R UNNING tanggal 7 - 10 Mei 2015 di Bandung

Bulan Juni

  1. Strategic Planning tanggal 8 - 12 Juni 2015 di Bandung

Apabila ada kebutuhan berkenaan dengan training jangan sungkan untuk menghu bungi kami atau dapat mengunjungi website kami di

formatting link
atau
formatting link
untuk mendapatkan silabus training yang di perlukan.

Demikian informasi dari kami, senang sekali dapat membantu dalam penyusunan Training Plan di Perusahaan Bapak / Ibu.

Terima kasih.

Salam Hangat,

Wahyu H.

PT Mairodi Mandiri Sejahtera

Jl.PH.H.Mustofa No.35, Gd.Dapenpos Lt.2 , Bandung 40124

Mobile : 0813 2205 0262, 0818 0960 0076, 022 722 82 252

Phone : (022)7215416 - 721 5668 ext. 104

Fax : (022)7215668

Email: snipped-for-privacy@gmail.com

Reply to
bursatrainingbandung
Loading thread data ...

a. To get that money out of your pocket

--------------------------------------- Posted through

formatting link

Reply to
kaz

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.