DCM

Does any buddy know How DCM work and does it require an input clock sigal or a output signal from external oscillator can work also. Plus how do i connect my code to the output of DCM

Thanks

Reply to
Fizzy
Loading thread data ...

Fizzy schrieb:

RTFM.

Instanciate a component from Coregenerator?

Regards Falk

Reply to
Falk Brunner

In fewer words than the manual which you should read: o The Delay Locked Loop is at the center. o A series of delay elements can provide a delay of an input signal such as that from an oscillator up to 20 ns, perhaps more. o This multi-element delay chain is tapped at the right point so the delayed input lines up with where you expect the next input to be at the reference point you select. o The DFS mode (frequency synthesis) taps and muxes this same delay line at multiple points to give you the M/D frequency ratio.

The output from the DCM is a signal that often goes through a global clock buffer.

Fizzy, Are you expecting comp.arch.fpga to be an instructional forum for you? It seems many of your posts are very green to the point that it doesn't look like you do basic research on the items you have question about. If you're new to programmable logic, welcome to the world ahead of you. Please read the data sheets, read the user guides, read the textbooks on how to code HDL. It's much more effective when this forum is used to help solve problems rather than provide basic instruction which otherwise has multiple sources.

Happy coding,

- John_H

Reply to
John_H

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.