1. Home
  2. Field-Programmable Gate Arrays
  3. chipscope + mdm with microblaze ..

chipscope + mdm with microblaze ..

Hi all, I'm having some trouble when trying to work with chipscope and mdm. It goes like this - I have a microblaze design (as sub module) that contains mdm. In the ISE (not inside EDK) I added a chipscope ILA core.

When trying to map the design the mapper "screamed" about me trying to use 2 Bscans (where there is only one available).

I knows that if using chipscope in EDK flow we can tell the EDK that the system contains MDM and it does the job. What can I do when working in ISE ?

any help will be appreciated

P.S. - my device is V2P30

Thanks, Mordehay.

Reply to
me_2003
Loading thread data ...

You should be able to pass the correct value for that parameter where you instantiate the ILA. However, you didn't say whether you are using the core inserter or genrating the ICON and ILA and instantiating them is the design. My suggestion will work for the later.

Reply to
motty

Hi motty,

I'm using the core inserter - its just more convenient that way. Is there a way to pass this parameter when using the core inserter ? Thanks, Mordehay.

Reply to
me_2003

I've never seen that option, but I've never looked since I haven't used the inserter on an EDK project (ISE with MDM module).

Reply to
motty

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.