Can someone suggest a project/application that would call for an XC2V6000-4BF957C? Thanks.
-Emile
- posted
20 years ago
BF957C Application
Loading thread data ...
- Vote on answer
- posted
20 years ago
--
--Ray Andraka, P.E. President, the Andraka Consulting Group, Inc.
401/884-7930 Fax 401/884-7950 email snipped-for-privacy@andraka.com
formatting link
"They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -Benjamin Franklin, 1759
- Vote on answer
- posted
20 years ago
Use the DXN and DXP balls of the device along with a MAX6687 from Maxim semi to make a thermometer. The FPGA will use remarkably little power in this mode, as long as you don't connect any of the other 955 pins.
HTH, Symsx.
(p.s. Or you can also use the same pins in the feedback path of an op-amp to use the FPGA in its secret, unpublished 'logarithmic' mode.)
- Vote on answer
- posted
20 years ago
You could always get it to flash a LED every few seconds :-)
Simon
- Vote on answer
- posted
20 years ago
Sorry, need speedgrade -6.
Homann
-- Magnus Homann, M.Sc. CS & E d0asta@dtek.chalmers.se