Aurora over Rocket IO and EDk

Hi , Has anyone implemented a design using Aurora over Rocket IO in EDK...If so please point me to the correct document.... What I am trying to do is to hook up a BRAM in an OPB core to send data to the Rocket I/O through Aurora and then on the Receiver side, use a BRAM to receieve the data... I wrote the code but I have lots of questions regarding generating the differential clock and the RESET..So if anyone can help me out, then that would be great.. Thanks in advance....

-- Parag

Reply to
beeraka
Loading thread data ...

Hi,

I did real time image transmission on 2Gbits fiber, using 2 boards 2VP20's rocket IOs. I followed what was in the aurora's documentation for reset and clocks and it worked without much problems. It won't be too difficult to drive aurora with your application.

Read carefully aurora's specification and examples, and then ask precise questions.

a écrit dans le message de news: snipped-for-privacy@z14g2000cwz.googlegroups.com...

Reply to
sjulhes

When you generate the aurora core with coregen, the generated files include not only a decent document explaining that in quite a bit of detail, but also an example top level file showing in detail how to make those connections.

Reply to
Duane Clark

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.