StAVeR-24M32, a microcontroller module based on an Atmel ATmega32.

Do you have a question? Post it now! No Registration Necessary

Translate This Thread From English to


19-Sep-2003
StAVeR-24M32 is a microcontroller module based on an Atmel ATmega32
in a small DIP24 package with the same pin out as the Parallax Basic
Stamp®, NetMedia BasicX(TM) and the BasicMicro Atom. However this DIP
module doesn't have an interpreter. It needs a compiler such as a C
compiler, BASIC compiler or it can be programmed directly in Assembler.
Dowloading code is done via the built in RS232 interface, so no need
for an external programmer.  
http://www.dontronics.com/staver.html

http://www.dontronics.com/new.html

Site Timeline