PXA270 USB host port 2

I have a custom board with pxa270 with a linux 2.6.18 kernel. USB host port 1 works correctly, then I want to use USB host port 2. I configured UHCHR and UP2OCR as follows, but port 2 don't work.

UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE | UP2OCR_CPVEN | UP2OCR_CPVPE; UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);

The system doesn't see an usb key plugged to USB host port 2, and /sys/ class/usb_host/usb_host1/registers is as follows:

bus platform, device pxa27x-ohci PXA27x OHCI ohci_hcd version 2005 April 22 OHCI 1.0, NO legacy support registers control 0x083 HCFS=operational CBSR=3 cmdstatus 0x00000 SOC=0 intrstatus 0x00000064 RHSC FNO SF intrenable 0x8000001a MIE UE RD WDH hcca frame 0xfe10 fmintvl 0xa7782edf FIT FSMPS=0xa778 FI=0x2edf fmremaining 0x80001f1c FRT FR=0x1f1c periodicstart 0x2a2f lsthresh 0x0628 roothub.a 04001202 POTPGT=4 NOCP NPS NDP=2(3) roothub.b 00000000 PPCM=0000 DR=0000 roothub.status 00008000 DRWE roothub.portstatus [0] 0x00000100 PPS roothub.portstatus [1] 0x00000100 PPS roothub.portstatus [2] 0x00000100 PPS

There is another configuration to enable USB host port 2 or it could be an hardware problem? The standard linux pxa27x ohci driver is able to manage both USB host port 1 and port 2?

Thanks in advance, bye.

Reply to
ghiggia
Loading thread data ...

I have observed the same issue. Did you resolve the issue yet?

Reply to
achieveforce

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.