Problem connecting to VxWorks Target Agent

Hi,

I have problems connecting/pinging the MVME167 target:

-> ifShow sn (unit number 0): Flags: (0x63) UP BROADCAST ARP RUNNING Internet address: 150.12.1.240 Broadcast address: 150.12.255.255 Netmask 0xffff0000 Subnetmask 0xffff0000 Ethernet address is 00:00:4b:0b:b3:a8 Metric is 0 Maximum Transfer Unit size is 1500

11 packets received; 4 packets sent 0 input errors; 0 output errors 0 collisions

lo (unit number 0):

Flags: (0x69) UP LOOPBACK ARP RUNNING Internet address: 127.0.0.1 Netmask 0xff000000 Subnetmask 0xff000000 Ethernet address is 00:00:4b:0b:b3:a8 Maximum Transfer Unit size is 4096

0 packets received; 0 packets sent 0 input errors; 0 output errors 0 collisions

value = 18 = 0x12

-> Cannot register service: RPC: Timed out unable to register (WINDVIEW, WINDVIEW_VERS_CURRENT, udp).

The target doesn't reply even though the packets sent/received entries a shown by "ifShow" do change when I ran "ping" from the host.

Any hint would be greatly appreciated.

Thanks, Helen