I want to set a colleague's son up to work on some simple ARM projects on an LPC2106, using material I have on hand. I have plenty of EVBs etc lying about, but the only JTAG adapters I have are a few Keil ULINK2s and a Rowley CrossConnect. Is there any free debugger that works with either of these adapters?
Thanks.
Not that I am aware of, but OpenOCD works with the Amontec Tiny device, which is >very< low cost at 29 Euro.
-- Regards, Richard. + http://www.FreeRTOS.org Designed for Microcontrollers. More than 7000 downloads per month. + http://www.SafeRTOS.com Certified by TÜV as meeting the requirements for safety related systems.
Mmmm.. Sparkfun sells an Olimex (?) adapter for US$20.95 which is even cheaper, and stated to work with OpenOCD, but I was *really* hoping to find a way to use what I already have lying about.
Using H-JTAG will give you a free RDI interface to the Wiggler and clone parallel port devices along with flash burning, but you'd still need something else (OpenOCD perhaps) for breakpoints and source level debugging.
The newer releases of H-JTAG may be up to talking to USB devices -- I haven't kept up with it, since it's not my normal interface.
-- Rich Webb Norfolk, VA
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.