1. Home
  2. Embedded Programming
  3. CRC 32 issue!

CRC 32 issue!

hi, i am having this weird sort of problem , my crc32 generator for mac gives me correct crc32 value only for a particular set of data. for instance

1- broadcast ip and fixed data ---> correct crc32 value 2- broadcast ip and data set changed ---> incorrect crc 3- general ip and fixed data ---> incorrect crc32.

i have no idea what's wrong with it. just for information , i took crc32 code from outputlogic.com and i am using it.

Kindly reply soon ...thanks a lot :)

--------------------------------------- Posted through

formatting link

Reply to
salimbaba
Loading thread data ...

the issue has been solved =D

--------------------------------------- Posted through

formatting link

Reply to
salimbaba

You've given no useful information to allow anyone to help you as to what your problem is - yet you ask for fast replies (politely, which is nice).

You then follow it up with a useless post with no context (get a proper newsreader, rather than using EmbeddedRelated's rather poor gateway - or at least learn to use that gateway properly). You say you've fixed the problem, but don't say what the problem was or how you've fixed it - thus ensuring that no one else can benefit from your post.

This newsgroup is a helpful place - but it needs a bit more thought on the part of the poster!

Reply to
David Brown

lol ...sorry mate .. actually it wasn't a problem when i figured out what was going wrong ... couldn't delete the post from embeddedrelated's site ...

sorry for the inconvenience ..

My signals were not triggering the crc32 generator on time which was causing problems. And yeah now i realize that i posted no useful info :p so again sorry for that... will be careful in future.. =)

--------------------------------------- Posted through

formatting link

Reply to
salimbaba

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.