Hi, I did a design with AT45DB321D to use with ASIC. the ASIC development kit contained the AT45DB321D 32Mbit flash and I use the same thing in my design.
But now unfortunately the AT45DB321D 32Mbit chip is out of stock every where and it has 7 months lead time. is there any one who know a compatible part for this serial flash
--------------------------------------- Posted through
prabash skrev 2010-11-24 16:44:
The only thing close to this is another chip in the same series. The 8 Mbit are more available.
-- Best Regards Ulf Samuelsson These are my own personal opinions, which may or may not be shared by my employer Atmel Nordic AB
le
Winbond makes large flash memory chips. They are pin-compatible, but the software will need some changes.
Leon
Leon skrev:
I checked one of the Winbond parts and it was not pin compatible with the AT45 series.
The only one I know of is Macroix, and they only do small parts which have a different command set.
-- Best Regards Ulf Samuelsson These are my own personal opinions, which may or may not be shared by my employer Atmel Nordic AB
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.